Cesar,
I am not sure what you mean by “cheap usb sound card”
You need a USB audio sound fob with a specific chip that is supported by app_rpt.
It needs to be one of the following CM108, CM119 or CM119B ’
Look for USB sound fobs with one of these chips.
73
Marshall - ke6pcv
···
From: Cesar Gonzalo via AllStarLink Discussion Groups [mailto:noreply@community.allstarlink.org]
Sent: Monday, January 27, 2020 10:27 AM
To: ke6pcv@cal-net.org
Subject: [AllStarLink Discussion Groups] Help setting up USB Sound with vox
Cesar_Gonzalo
January 27
Hi I’m new and got stuck setting up the node
Hardware :
-Rapberry Pi 4
· Cheap USB Sound Card
· Baofeng UV5
· Easy Digi KF5INZ
·
I guess my node is set up , I can see the green on the nodes list.
Problem , I do not need the cos or ptt thing or modify a usb sound , is it possible just to configure the vox to handle the PTT .
I know all the pros and cons about using the VOX, but for now that’s all what I need
when running simpleusb-tune-menu :
Active simpleusb device stanza : [USB]
but then I get a message " Device usb currently not active"
Thanks For the help
Visit Topic or reply to this email to respond.
You are receiving this because you enabled mailing list mode.
To unsubscribe from these emails, click here.