USBRadio virgin

I’ve been using simpleUSB for the last 15-odd years and now I’m attempting to use one of these AIOC dingleberries and my spidey-sense is confused; in usbradio.conf, why do both rxctcssfreqs and txblahblah each have 2 PL frequencies listed? Thinking literally, It feels like I’m about to setup a community repeater. Question-2: Is DPL supported? (can’t find DCS or DPL in the file). Thanks.

Bob
KK6RQ

Taken from the old ACID system admin manual:

And no, app_rpt has no way to decode/encode DCS. Only CTCSS is supported.

If you want to use DCS, you’ll need to decode/encode that in the radio and pass COR logic to the app_rpt interface.

OK…I’m still a little confused; (And I’m not able to see what you wrote while I’m in this screen typing my answer so…) for normal pedestrian operation of a simplex hotspot, do I just need to set the tone in the first one or all 3…?

Bob

https://wiki.allstarlink.org/wiki/USBRadio_Channel_Driver

You can safely set the tone you want to use in all of them

Thanks. Now off on to my adventure that is USBradio…