URI startup

wb2ers1 · October 29, 2015, 1:55pm

Hello all. New user here trying to get up to speed.

I connected a DMK URI to our Asterisk running ACID.

We configured it as follows:

----------usbradio.conf-------------

[general]

[usb]

hdwtype=0

rxboost=1

rxctcssrelax=1

rxctcssfreqs=100.0

carrierfrom=usb

ctcssfrom=usb

rxdemod=flat

txprelim=yes

txlimonly=yes

txtoctype=notone

txmixa=voice

txmixb=no

invertptt=0

duplex=1

------------------rpt.conf--------------

[1444]

rxchannel=Radio/usb

erxgain=-3

etxgain=3

controlstates=controlstates

functions=functions

phone_functions=functions

link_functions=functions

telemetry=telemetry

wait_times=wait-times

context=radio-usb

callerid=“WB2ERS” <0000000000>

idrecording = |WB2ERS

accountcode=RADIO

hangtime=1000

althangtime=4000

totime=170000

idtime=540000

politeid=30000

idtalkover=|iid

nounkeyct=1

duplex=1

----------extensions.conf----------

[radio-usb]

exten => 1444,1,Ringing

exten => 1444,n,Wait(3)

exten => 1444,n,Answer

exten => 1444,n,Rpt(1444|X)

exten => 1444,n,Hangup

-------------iax.conf--------------

[IAXURI]

type=user

context=radio-usb

auth=md5

secret=mysecret

host=dynamic

disallow=all

allow=gsm

notransfer=yes

callerid=IAXURI

We have one way audio and signaling from the Ethernet side to the radio side however from the radio to the Asterisk, nothing.

I verified that CTCSS detect (pin 7) goes from 5v to 0v upon receive signal .

I have the receiver audio connected to pin 22 Left_Out.

Any ideas?

Mark DuMoulin

WB2ERS

Wb2ers@metcom.com

C 800-410-3130

Szingman2 · October 29, 2015, 2:05pm

Also noticed “I have the receiver audio connected to pin 22
Left_Out.”

Receive audio goes to mic in pin 9.

···

On 10/29/2015 9:55 AM, Mark DuMoulin @
WB2ERS wrote:

      Hello all. New user here trying to get up

to speed.

�

        I connected a
DMK URI to our Asterisk running ACID.

        We configured

it as follows:

�

----------usbradio.conf-------------

[general]

[usb]

hdwtype=0��

rxboost=1��

rxctcssrelax=1

rxctcssfreqs=100.0��

carrierfrom=usb��

ctcssfrom=usb��

rxdemod=flat��

txprelim=yes��

txlimonly=yes��

txtoctype=notone��

txmixa=voice��

txmixb=no��

invertptt=0��

duplex=1��

�

------------------rpt.conf--------------

[1444]

rxchannel=Radio/usb��

erxgain=-3��

etxgain=3��

        controlstates=controlstates�
��

functions=functions��

phone_functions=functions��

link_functions=functions��

telemetry=telemetry��

wait_times=wait-times��

context=radio-usb��

        callerid="WB2ERS"
<0000000000>��

        idrecording
= |WB2ERS��

accountcode=RADIO��

hangtime=1000��

althangtime=4000��

totime=170000��

idtime=540000��

politeid=30000��

idtalkover=|iid��

nounkeyct=1��

duplex=1

�

----------extensions.conf----------

[radio-usb]

        exten
=> 1444,1,Ringing

        exten
=> 1444,n,Wait(3)

        exten
=> 1444,n,Answer

        exten
=> 1444,n,Rpt(1444|X)

        exten
=> 1444,n,Hangup

�

-------------iax.conf--------------

[IAXURI]

type=user

context=radio-usb

auth=md5

secret=mysecret

host=dynamic

disallow=all

allow=gsm

notransfer=yes

callerid=IAXURI

�

        We have one way
audio and signaling from the Ethernet side to the radio side
however from the radio to the Asterisk, nothing.

        I verified that
CTCSS detect (pin 7) goes from 5v to 0v upon receive signal
.

        I have the
receiver audio connected to pin 22 Left_Out.

�

Any ideas?

�

Mark DuMoulin

WB2ERS

C 800-410-3130

�




_______________________________________________
App_rpt-users mailing list
To unsubscribe from this list please visit and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

Wb2ers@metcom.com

App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users