Good Morning! I have a two node ACID AllStar Server. Until today the telemetry and wait-times were common for both nodes. Today I change the lines for the first node to read, and lost the custom ct2 and ct8 tone ...
telemetry=telemetry42316
wait_times=wait-times42316
I copied the common stanzas and added the node number to form (the second node handled in a like manner)...
[telemetry42316]
ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
;ct2=|t(660,880,150,2048) ;Orig Tone
ct2=|t(2450,0,125,1024) ;Repeater Not Linked ;NASA Beep Tone
ct3=|t(440,0,150,4096) ;Repeater Linked ;Low Tone
ct4=|t(550,0,150,2048)
ct5=|t(660,0,150,2048)
ct6=|t(880,0,150,2048)
ct7=|t(660,440,150,2048)
;ct8=|t(700,1100,150,2048) ;Orig Tone ; ct for LINKED UNKEY
ct8=|t(262,330,150,2048)(784,330,150,2048) ;Harmony ; ct for LINKED UNKEY
remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);
remotemon=|t(1209,0,50,2048)
cmdmode=|t(900,903,200,2048)
functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
patchup=rpt/callproceeding
patchdown=rpt/callterminated
;
; This section allows wait times for telemetry events to be adjusted
; A section for wait times can be defined for every repeater
;
[wait-times42316]
telemwait=1750 ; Telemetry wait set to 1.75 seconds
idwait=500 ; ID wait set to 0.5 seconds
unkeywait=1000 ; Unkey wait set to 1.0 seconds
calltermwait=1500 ; Call termination wait set to 1.5 seconds
It feels like I have gone back to the default CT tones in app_rpt. Has anyone done this successfully?
...STeve - KF5VH