https://www.youtube.com/watch?v=1D5rgFGLLmY
A canadian ham came with a solution to use a voice assitant to control his IRLP controler…
This is very fun to watch… Worder if it would be possible to install on an allstar node and add voice control.
I have a 900 mhz project comming on and most of the radio we have dont have dtmf mic. This would be like removing the dtmf obligation to operate the repeater
Pierre
VE2PF
IRLP was just the start - he’s already worked on controller interfacing with Sierra Radio Systems controllers (SRS Comm Server) and is awaiting his NWDigital gear to get that interfaced. Asterisk is on the go … he just started up a github stub for the different interfaces he’s working on … https://github.com/williamfranzin/ he has been able to spend some hard core time in the last few days to get the SRS going as he had some time off during Christmas break. Very impressive work. He’s on our local repeater society executive for the first time and we’re pushing to test out some digital linking options and controller opportunities. He’s also 1 of 2 guys who started up our local highspeed city-wide ham radio network (with AREDN nodes) - which we also will use as backhaul digital linking testing with these modes.
73, Dan ve4drk
On Sat, Jan 5, 2019 at 4:00 PM Pierre Martel petem001@gmail.com wrote:
A canadian ham came with a solution to use a voice assitant to control his IRLP controler…
This is very fun to watch… Worder if it would be possible to install on an allstar node and add voice control.
I have a 900 mhz project comming on and most of the radio we have dont have dtmf mic. This would be like removing the dtmf obligation to operate the repeater
Pierre
VE2PF
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Nice! He does look like a pretty good asset to have for a group!
Dont run this guy out of the hobby with politics!
Wish I had a guy like that around to help with all thenproject we have runnning… We do have a hamwan started and I hope more repeater owner around will get on the allstarlink band wagon!
Pierre
VE2PF
Le sam. 5 janv. 2019 à 17:35, Dan Keizer ve4drk@gmail.com a écrit :
IRLP was just the start - he’s already worked on controller interfacing with Sierra Radio Systems controllers (SRS Comm Server) and is awaiting his NWDigital gear to get that interfaced. Asterisk is on the go … he just started up a github stub for the different interfaces he’s working on … https://github.com/williamfranzin/ he has been able to spend some hard core time in the last few days to get the SRS going as he had some time off during Christmas break. Very impressive work. He’s on our local repeater society executive for the first time and we’re pushing to test out some digital linking options and controller opportunities. He’s also 1 of 2 guys who started up our local highspeed city-wide ham radio network (with AREDN nodes) - which we also will use as backhaul digital linking testing with these modes.
73, Dan ve4drk
On Sat, Jan 5, 2019 at 4:00 PM Pierre Martel petem001@gmail.com wrote:
A canadian ham came with a solution to use a voice assitant to control his IRLP controler…
This is very fun to watch… Worder if it would be possible to install on an allstar node and add voice control.
I have a 900 mhz project comming on and most of the radio we have dont have dtmf mic. This would be like removing the dtmf obligation to operate the repeater
Pierre
VE2PF
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.