I just set up a remote base with deemphasized audio, not discriminator.
On usbradio.conf when I set up rxdemod=flat, the audio sounds very bassy coming from my remote base, so I changed it to rxdemod=speaker.
I restarted asterisk, and now no audio came from the radio, just a dead carrier, even when I turned the rx level to 999 in usbradio.conf.
73
Skyler
···
Here is my usbradio.conf file:
[general]
[usb]
hdwtype=0
rxboost=1
txboost=0
rxctcssrelax=1
txctcssdefault=250.3
;rxctcssfreqs=100
;txctcssfreqs=100
;rxctcssoverride=1
carrierfrom=usb
ctcssfrom=usb
rxdemod=speaker !!!I get audio when this is set to flat, but nothing on speaker!!!
txprelim=no
txlimonly=no
txtoctype=phase
txmixa=composite
txmixb=no
invertptt=0
duplex=1
rxondelay=1
rxsquelchdelay=25
rxnoisefiltype=0
eeprom=0
;gpio=out1
gpio1 = out1 ; in, out0 or out1
gpio2 = out1
gpio4 = in ; in, out0 or out1
I figured it out, I had to turn rxsquelchdelay off.
···
On Sun, Apr 3, 2016 at 1:33 PM, Skyler F electricity440@gmail.com wrote:
I just set up a remote base with deemphasized audio, not discriminator.
On usbradio.conf when I set up rxdemod=flat, the audio sounds very bassy coming from my remote base, so I changed it to rxdemod=speaker.
I restarted asterisk, and now no audio came from the radio, just a dead carrier, even when I turned the rx level to 999 in usbradio.conf.
73
Skyler
Here is my usbradio.conf file:
[general]
[usb]
hdwtype=0
rxboost=1
txboost=0
rxctcssrelax=1
txctcssdefault=250.3
;rxctcssfreqs=100
;txctcssfreqs=100
;rxctcssoverride=1
carrierfrom=usb
ctcssfrom=usb
rxdemod=speaker !!!I get audio when this is set to flat, but nothing on speaker!!!
txprelim=no
txlimonly=no
txtoctype=phase
txmixa=composite
txmixb=no
invertptt=0
duplex=1
rxondelay=1
rxsquelchdelay=25
rxnoisefiltype=0
eeprom=0
;gpio=out1
gpio1 = out1 ; in, out0 or out1
gpio2 = out1
gpio4 = in ; in, out0 or out1
–
Skyler Fennell
amsatnet.info
KDØWHB
electricity440@gmail.com