Again today our repeater ( K2ETS ) had a severe popping/clicking noise
about every 1/2 second that was totally disrupting the audio. We are running
two repeaters using Debian on a Raspberry Pi with USBradio. The SD card is
high speed Sandisk Ultra Plus. Even the voice ID was illegible. A restart of
Asterisk did not help this time. I was forced to re-boot the Raspberry Pi,
after which the symptom went away. This seems to occur on a regular basis. I
m curious if anyone else has experienced this, any any hints as to how to
debug.
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
RPi, RPi2, or RPi3? Thinking throughout and/or usb loading.
Have you looked at /var/log/asterisk/messages for errors and warnings? It sounds like asterisk is unhappy, which can result from hardware issues.
Thanks,
Bob
K6ECM
73
···
On Dec 6, 2017, at 11:05 AM, "lengriff@optimum.net" <lengriff@optimum.net> wrote:
Again today our repeater ( K2ETS ) had a severe popping/clicking noise
about every 1/2 second that was totally disrupting the audio. We are running
two repeaters using Debian on a Raspberry Pi with USBradio. The SD card is
high speed Sandisk Ultra Plus. Even the voice ID was illegible. A restart of
Asterisk did not help this time. I was forced to re-boot the Raspberry Pi,
after which the symptom went away. This seems to occur on a regular basis. I
m curious if anyone else has experienced this, any any hints as to how to
debug.
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.