Radio with iaxclient

App_rpt-users
1

Hi all.

I have installed a private node with a URI connected to a iCOM radio.

I can connect to my asterisk with some standard iax softphones, like http://sourceforge.net/projects/kiax/.

But this iax clients are for phones, not for radios. There is no PTT support.

I’m trying to develop my own softphone with the http://sourceforge.net/projects/iaxclient library, but I can’t find any documentation about radio management with iaxclient.

Any advice would be very appreciated.

Thanks in advance.

John

2

Don and Dave, thanks for your sugestions.
I’m playing with the iaxRpt - PTT Radio Dispatch Client.

I can connect and transmit OK.

The problem now is that i can’t receive the audio from the radio. I only receive a “tone” in my PC, not the audio…

Best Regards.

Jhon

···

On Mon, Jun 24, 2013 at 4:57 PM, John Locke jldharma@gmail.com wrote:

Hi all.

I have installed a private node with a URI connected to a iCOM radio.

I can connect to my asterisk with some standard iax softphones, like http://sourceforge.net/projects/kiax/.

But this iax clients are for phones, not for radios. There is no PTT support.

I’m trying to develop my own softphone with the http://sourceforge.net/projects/iaxclient library, but I can’t find any documentation about radio management with iaxclient.

Any advice would be very appreciated.

Thanks in advance.

John

3

Hi all,
I have been fiddling with the iaxclient and the iaxrpt and all the basic stuff seems to be working.

I have 2 icom radios connected to the PC with the URIs. I would like to PTT (or “dial”) to the 2 radios at the same time… Is this posible with the iaxclient?

Or maybe with some configuration of the asterisk, to “link” the two channels…

Thanks in advance

Best regards

···

On Mon, Jun 24, 2013 at 4:57 PM, John Locke jldharma@gmail.com wrote:

Hi all.

I have installed a private node with a URI connected to a iCOM radio.

I can connect to my asterisk with some standard iax softphones, like http://sourceforge.net/projects/kiax/.

But this iax clients are for phones, not for radios. There is no PTT support.

I’m trying to develop my own softphone with the http://sourceforge.net/projects/iaxclient library, but I can’t find any documentation about radio management with iaxclient.

Any advice would be very appreciated.

Thanks in advance.

John