Hi all,
i'm installing a system with Quad Radio card, but i can't find any documentation about zaptel.conf and zapata.conf files for this card.
All seems to start ok but when i call rpt(${NODE}) i get this message: "rpt:Sorry unable to obtain Rx channel"
In rpt.conf, rxchannel is Zap/1 and txchannel is Zap/2.
I've followed zaptel.conf comments and configured channels=1-4
# cat /proc/zaptel/2 shows this:
Span 2: PCIRADIO/0 "Board 1"
1 PCIRADIO/0/0
2 PCIRADIO/0/1
3 PCIRADIO/0/2
4 PCIRADIO/0/3
(Span 1 is ZTDUMMY)
I don't know if channels in zapata.conf must be configured with any signalling type as with other cards like tdm400 or so.
Can anybody help me or send any working example?
Thanks in advance,
/I�aki Civico
I found a sample in /usr/src/configs/pciradio
Here's my zaptel.conf
tx=1000
ctcss=1000,1,1000
invertcor=y
debouncetime=10
exttone=n
channels=1
tx=1000
ctcss=1000,1,1000
invertcor=n
debouncetime=10
exttone=n
channels=2
be sure to do a "ztcfg -v" after edit...
Zaptel Version: 1.4.12.1RPT_A
Echo Canceller: MG2
Configuration
···
======================
2 channels to configure.
--
Tim
:wq
On Oct 23, 2009, at 12:33 PM, Iñaki Civico wrote:
Hi all,
i'm installing a system with Quad Radio card, but i can't find any
documentation about zaptel.conf and zapata.conf files for this card.
All seems to start ok but when i call rpt(${NODE}) i get this message:
"rpt:Sorry unable to obtain Rx channel"
In rpt.conf, rxchannel is Zap/1 and txchannel is Zap/2.
I've followed zaptel.conf comments and configured channels=1-4
# cat /proc/zaptel/2 shows this:
Span 2: PCIRADIO/0 "Board 1"
1 PCIRADIO/0/0
2 PCIRADIO/0/1
3 PCIRADIO/0/2
4 PCIRADIO/0/3
(Span 1 is ZTDUMMY)
I don't know if channels in zapata.conf must be configured with any
signalling type as with other cards like tdm400 or so.
Can anybody help me or send any working example?
Thanks in advance,
/Iñaki Civico
_______________________________________________
App_rpt-users mailing list
App_rpt-users@qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users
Ops, i'm sorry, i missed that directory.
Thank you very much, Tim
Tim Sawyer wrote:
···
I found a sample in /usr/src/configs/pciradio
Here's my zaptel.conf
tx=1000 ctcss=1000,1,1000
invertcor=y
debouncetime=10
exttone=n
channels=1
tx=1000
ctcss=1000,1,1000
invertcor=n
debouncetime=10
exttone=n
channels=2
be sure to do a "ztcfg -v" after edit...
Zaptel Version: 1.4.12.1RPT_A
Echo Canceller: MG2
Configuration
2 channels to configure.
--
Tim
:wq
On Oct 23, 2009, at 12:33 PM, I�aki Civico wrote:
Hi all,
i'm installing a system with Quad Radio card, but i can't find any
documentation about zaptel.conf and zapata.conf files for this card.
All seems to start ok but when i call rpt(${NODE}) i get this message:
"rpt:Sorry unable to obtain Rx channel"
In rpt.conf, rxchannel is Zap/1 and txchannel is Zap/2.
I've followed zaptel.conf comments and configured channels=1-4
# cat /proc/zaptel/2 shows this:
Span 2: PCIRADIO/0 "Board 1"
1 PCIRADIO/0/0
2 PCIRADIO/0/1
3 PCIRADIO/0/2
4 PCIRADIO/0/3
(Span 1 is ZTDUMMY)
I don't know if channels in zapata.conf must be configured with any
signalling type as with other cards like tdm400 or so.
Can anybody help me or send any working example?
Thanks in advance,
/I�aki Civico
_______________________________________________
App_rpt-users mailing list
App_rpt-users@qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users