Good afternoon.
Im having problems with audio in and out on SimpleUsb ( RimLite).
Im running the lastest AllStar Hamvoip on my raspberry Pi4 and connected to RC210 controller.
RC210 settings:
Timers tab : Active Hangtimeer for port 3 is )
Port switches Port 3: Tx enabled, Rx enabled, RPT mode disabled, Access mode is Carrier
Port jumpers:
Port 3 De-emphasis is flat,Port 3 COS jumper 6 for COS LOW pins 1 & 2.
I followed all the setting from Repeater builder sheet.
- ; ; Usbradio channel driver Configuration File ;
[general]
[usb27225]
hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=100.0 rxctcssfreqs=100.0 txctcssfreqs=100.0 ;rxctcssoverride=0 carrierfrom=dsp ctcssfrom=dsp rxdemod=flat txprelim=yes txlimonly=no txtoctype=notone txmixa=composite txmixb=0
invertptt=0 duplex=0 rxondelay=0 rxnoisefiltype=0 eeprom=1
#includeifexists custom/usbradio.conf