I revised my interface diagram, and added a poorly drawn schematic.
http://keekles.org/~w9cr/Quantar%20to%20Quad%20PCI%20card.pdf
I have this in operation now with two systems and a third coming online. With
the proper configuration you can setup the station for in-cabinet repeat of
P25 and then analog via the repeater controller.
73's
http://keekles.org/~w9cr/Quantar%20to%20Quad%20PCI%20card.pdf
I've updated this again, as I was getting two ID's, one from the station and
one from the controller. I setup a second channel with an ID and logic to
switch to it during P25, and back to the first no-id channel during analog.
An example codeplug with working wireline is presented for your use.
The schematic was redrawn by a friend of mine to be a bit more professional
looking.
73's
On 3/21/16 10:57 PM, Bryan Fields wrote:
I revised my interface diagram, and added a poorly drawn schematic.
--
Bryan Fields
727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net