Node information display

TG9AOR · November 18, 2018, 1:07am

Hello to all. I would like to know in what file resides the information pertaining to the node frequency, CTCSS, etc.

I have noticed some nodes on the stats page display bridging information on the frequency field, I would like to update my node to reflect that.

Also, is there a way to input this information for the private nodes as well?

73

José Roberto Ruíz García Salas TG9AOR

tsawyer · November 18, 2018, 3:19am

Private nodes cannot report their status to the stats server.

The frequency field is freeform. You may put any information in there. Frequency and tome are on the Radio/Interface tap of the Node Configuration page.

···

Tim WD6AWP

Steve_Passmore · November 18, 2018, 3:31am

There is no file. The info is from what is entered into your node configuration when you are logged into the allstarlink.org website.

Steve, k6kya

···

On Sat, Nov 17, 2018, 5:07 PM José Roberto Ruíz García Salas TG9AOR <qrz@tg9aor.net wrote:

Hello to all. I would like to know in what file resides the information pertaining to the node frequency, CTCSS, etc.

I have noticed some nodes on the stats page display bridging information on the frequency field, I would like to update my node to reflect that.

Also, is there a way to input this information for the private nodes as well?

73

José Roberto Ruíz García Salas TG9AOR

App_rpt-users mailing list

App_rpt-users@lists.allstarlink.org

http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”

You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

tsawyer · November 18, 2018, 3:50am

Yes, Steve is right. I wasn’t clear about that info being on the web site allstarlink.org. Or you can change it on the future allstarlink site at https://web-tpa.allstarlink.org/portal/nodes.php

It uses the same login and data.

···

Tim WD6AWP

Mike · November 18, 2018, 5:06pm

Tim,

  I wonder if it might be possible for you to add a field to the

user node information.

That would be a weblink to that nodes/servers ALLMON page.

  I think it would be a asset to the group. Perhaps I am off on

that though.

…mike/kb8jnm

···

On 11/17/2018 10:50 PM, Tim Sawyer
wrote:

        Yes, Steve
is right. I wasn’t clear about that info being on the web
site allstarlink.org . Or you can
change it on the future allstarlink site at https://web-tpa.allstarlink.org/portal/nodes.php

        It uses the
same login and data.

          On Sat, Nov 17, 2018 at 7:32 PM Steve
Passmore k6kya@hokeynet.net wrote:

            There is no file.   The info is from what
is entered into your node configuration when you are
logged into the allstarlink.org
website.

Steve, k6kya

              On Sat, Nov 17, 2018, 5:07 PM José
Roberto Ruíz García Salas TG9AOR <qrz@tg9aor.net wrote:

                Hello
to all. I would like to know in what file resides
the information pertaining to the node frequency,
CTCSS, etc.

                I
have noticed some nodes on the stats page display
bridging information on the frequency field, I would
like to update my node to reflect that.

                Also,
is there a way to input this information for the
private nodes as well?

                  José
Roberto Ruíz García Salas TG9AOR

              App_rpt-users mailing list

              App_rpt-users@lists.allstarlink.org

              [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)



              To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)
              and scroll down to the bottom of the page. Enter your

email address and press the “Unsubscribe or edit
options button”

              You do not need a password to unsubscribe, you can do

it via email confirmation. If you have trouble
unsubscribing, please send a message to the list
detailing the problem.

          App_rpt-users mailing list

          App_rpt-users@lists.allstarlink.org

          [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)



          To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)
          and scroll down to the bottom of the page. Enter your

email address and press the “Unsubscribe or edit options
button”

          You do not need a password to unsubscribe, you can do it

via email confirmation. If you have trouble unsubscribing,
please send a message to the list detailing the problem.

–
Tim WD6AWP


_______________________________________________
App_rpt-users mailing list
To unsubscribe from this list please visit and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

tsawyer · November 18, 2018, 11:02pm

Mike,

Take a look at this https://web-tpa.allstarlink.org/nodelist/. Click on the node number and it will take you to the Allstar stats site. Is that what you were thinking about?

···

Tim WD6AWP

Mike · November 18, 2018, 11:55pm

I have seen that, but no, that’s not what I was referring to and
by the way, the revision is top notch in my book so don’t get me
wrong, no matter how good it is someone (like me) will always ask
for more… LOL

  What I was speaking to was one additional field that might show

in that list as you showed the link to, that was nothing more than
a place for a HTML link that could be used for ALLMON or a website
system info, rules/guidlines etc. User defined.

  I know it seems out of reach since there is only so much room for

all the data that is showing now but would be a nice resource if
it can be done.

Making it more of the one-stop for all things ASL.

Thanks Tim,

…mike/kb8jnm

···

On 11/18/2018 6:02 PM, Tim Sawyer
wrote:

Mike,

          Take a
look at this https://web-tpa.allstarlink.org/nodelist/ .
Click on the node number and it will take you to the
Allstar stats site. Is that what you were thinking about?

On Sun, Nov 18, 2018 at 9:06 AM Mike <mm@midnighteng.com >
wrote:

Tim,

              I wonder if it might be possible for you to add a

field to the user node information.

              That would be a weblink to that nodes/servers ALLMON

page.

              I think it would be a asset to the group. Perhaps I

am off on that though.

…mike/kb8jnm

              On
11/17/2018 10:50 PM, Tim Sawyer wrote:

                    Yes, Steve is right.
I wasn’t clear about that info being on the web
site allstarlink.org .
Or you can change it on the future allstarlink
site at https://web-tpa.allstarlink.org/portal/nodes.php

                    It uses the same

login and data.

                      On Sat, Nov 17, 2018 at 7:32 PM

Steve Passmore <k6kya@hokeynet.net >
wrote:

                        There is no file.   The info
is from what is entered into your node
configuration when you are logged into the allstarlink.org
website.

Steve, k6kya

                          On Sat, Nov 17, 2018, 5:07 PM
José Roberto Ruíz García Salas TG9AOR <qrz@tg9aor.net
wrote:

                            Hello
to all. I would like to know in what
file resides the information pertaining
to the node frequency, CTCSS, etc.

                            I
have noticed some nodes on the stats
page display bridging information on the
frequency field, I would like to update
my node to reflect that.

                            Also,
is there a way to input this information
for the private nodes as well?

                              José

Roberto Ruíz García Salas TG9AOR

                          App_rpt-users mailing list

                          App_rpt-users@lists.allstarlink.org

                          [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)



                          To unsubscribe from this list please visit
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
and scroll down to the bottom of the page.
Enter your email address and press the
“Unsubscribe or edit options button”
                          You do not need a password to unsubscribe,
you can do it via email confirmation. If
you have trouble unsubscribing, please
send a message to the list detailing the
problem.

                      App_rpt-users mailing list

                      App_rpt-users@lists.allstarlink.org

                      [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)



                      To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)
                      and scroll down to the bottom of the page.

Enter your email address and press the
“Unsubscribe or edit options button”

                      You do not need a password to unsubscribe, you

can do it via email confirmation. If you have
trouble unsubscribing, please send a message
to the list detailing the problem.

–
Tim WD6AWP

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
[http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)

To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

          App_rpt-users mailing list

          App_rpt-users@lists.allstarlink.org

          [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)



          To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)
          and scroll down to the bottom of the page. Enter your

email address and press the “Unsubscribe or edit options
button”

          You do not need a password to unsubscribe, you can do it

via email confirmation. If you have trouble unsubscribing,
please send a message to the list detailing the problem.

–
Tim WD6AWP


_______________________________________________
App_rpt-users mailing list
To unsubscribe from this list please visit and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users