Hello AllStar users - I’m having poor luck getting an AllStar node on the air. I have a registration number, server and node set up on the web site, and have tried ACID, DIAL, and now DIAL for RPi. I’m using a DMK Engineering URI USB interface cable and a Motorola mobile UHF radio that was working fine with IRLP and Echolink. The problem I’m having with DIAL is that there are no configuration scripts that line up with the documentation that people have written for setting up a new AllStar node. I have what I think are a correctly setup set of asterisk scripts but my node will not show up on the http://stats.allstarlink.org/ on-line nodes page. My node # is 42372. I’m in the CET time zone here in northern Switzerland - is there anyone who would be willing to kill an hour or two with me over Skype to troubleshoot the issue? I have two computers that I could use - one is a fanless brick based on an intel mobile processor and the other is an RPi 2 - I don’t really care which one we get going. I have some experience with IRLP and Echolink and have written some custom batch scripts to enhance the nodes so no my way somewhat around Linux. Thanks
I would be happy to ssh into your node and take a look
73, Steve N4IRS
···
On 10/24/2015 07:28 AM, Larry da Ponte
wrote:
Hello AllStar users - I'm having poor luck getting
an AllStar node on the air.� I have a registration number,
server and node set up on the web site, and have tried ACID,
DIAL, and now DIAL for RPi.� I’m using a DMK Engineering URI USB
interface cable and a Motorola mobile UHF radio that was working
fine with IRLP and Echolink.� The problem I’m having with DIAL
is that there are no configuration scripts that line up with the
documentation that people have written for setting up a new
AllStar node.� I have what I think are a correctly setup set of
asterisk scripts but my node will not show up on the�
on-line nodes page.� My node # is 42372.� I’m in the CET time
zone here in northern Switzerland - is there anyone who would be
willing to kill an hour or two with me over Skype to
troubleshoot the issue?� I have two computers that I could use -
one is a fanless brick based on an intel mobile processor and
the other is an RPi 2 - I don’t really care which one we get
going.� I have some experience with IRLP and Echolink and have
written some custom batch scripts to enhance the nodes so no my
way somewhat around Linux.� Thanks
_______________________________________________
App_rpt-users mailing list
To unsubscribe from this list please visit and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about."
1st Law of Logic
Steve is currently helping me get my AllStar node dialed in. The most recent DIAL with the setup script was able to download my settings from the AllStar site. I’m able to hear people connect but now the node radio RX is not working - until I move the GM3000 jumper JU551 to get the discriminator audio on pin 11. Getting closer - thank you so much Steve.
-Larry
···
On Sat, Oct 24, 2015 at 1:28 PM, Larry da Ponte hb9eyq@gmail.com wrote:
Hello AllStar users - I’m having poor luck getting an AllStar node on the air. I have a registration number, server and node set up on the web site, and have tried ACID, DIAL, and now DIAL for RPi. I’m using a DMK Engineering URI USB interface cable and a Motorola mobile UHF radio that was working fine with IRLP and Echolink. The problem I’m having with DIAL is that there are no configuration scripts that line up with the documentation that people have written for setting up a new AllStar node. I have what I think are a correctly setup set of asterisk scripts but my node will not show up on the http://stats.allstarlink.org/ on-line nodes page. My node # is 42372. I’m in the CET time zone here in northern Switzerland - is there anyone who would be willing to kill an hour or two with me over Skype to troubleshoot the issue? I have two computers that I could use - one is a fanless brick based on an intel mobile processor and the other is an RPi 2 - I don’t really care which one we get going. I have some experience with IRLP and Echolink and have written some custom batch scripts to enhance the nodes so no my way somewhat around Linux. Thanks