My instructions for keyfob modifications

App_rpt-users
1

Hi,

I have created an instructions set on how to modify a keyfob based on the 119
chip. These are basically just a different version of the original
instructions. Hopefully having a second set will help in making
modifications.

The lastest draft is located at http://m3h.com/usbfob-119.pdf. Feel free to
copy and share around.

Please take a look and privide feedback.

It would be nice to see these instructions linked on the main hardware page as
an alternative to the original instructions.

Mike

2

Hi,

I have created an instructions set on how to modify a keyfob based on the
119
chip. These are basically just a different version of the original
instructions. Hopefully having a second set will help in making
modifications.

The lastest draft is located at http://m3h.com/usbfob-119.pdf\. Feel free
to
copy and share around.

Please take a look and privide feedback.

It would be nice to see these instructions linked on the main hardware
page as
an alternative to the original instructions.

Mike
_______________________________________________
App_rpt-users mailing list
App_rpt-users@qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users

--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

NICE JOB!!
I especially liked your technique where you position the component to
be soldered to pin #13 first with hot glue to hold it in place before
actually soldering!
I've been doing it the hard way :wink:

I'll have to try this on my next one!

Michigan Broadband Systems Inc.
"Always Connected"

(734)527-7150

Steve's cellphone: (734)904-1811

ยทยทยท

--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.