Does anyone have a Maxtrac 300 UHF service manual??
I could sure use one. And there do not seem to be any on Ebay.
JIM WB6NIL
Does anyone have a Maxtrac 300 UHF service manual??
I could sure use one. And there do not seem to be any on Ebay.
JIM WB6NIL
http://www.repeater-builder.com/maxtrac/maxtrac-index.html
2/3 of the way down the page are the PDF's to download.
Thanks…
Ok… Ill say it. WHY DIDN’T I JUST LOOK THERE FIRST INSTEAD OF BEING A DUMASS AND
BOTHERING EVERYONE??
I said it.
JIM WB6NIL
From: ke2n@cs.com
To: telesistant@hotmail.com
Subject: RE: [App_rpt-users] maxtrac 300 uhf service manual
Date: Sat, 4 Jun 2011 11:50:04 -0400
Not sure if this is what you are after
Its on repeater-builder.com
MaxTrac Detailed Service Manual 6880102W84, was about $30 but is no longer available (NLA).
This is the low band, high band, UHF, and 800 MHz MaxTrac service manual that covers the MGA, MJA, MQA, MWA and AHA models. If you ever pop a cover on any of those models then you want this book on your shelf… it’s chock full of good stuff. You occasionally see these books on eBay and the other auction sites. Until then…
Part 1 Pages 001 thru 058 4.3 MB PDF
Part one has the manual index, model charts, assembly breakdown tables, performance spec tables, options, general information, block diagrams and the front panels
Part 2 Pages 059 thru 081 15.4 MB PDF
Part 2 has all of the Logic boards including the HLN5172, HLN5173, HLN9123 and HLN9313.
Part 3 Pages 082 thru 125 41.4 MB PDF
Part 3 has all of the RF boards including the HLB4099 (29.7-36), HLB4100 (36-42), HLB,4101 (42-50), HLD4321 (136-162), HLD4322B (146-174), HLD4322C (144-174), HLE9310 (449-470), HLE4424 (?), HLE4425 (403-430), HLF4095B (800 non-talkaround, single VCO), HLF9122A (talkaround, dual VCO).
Part 4 Pages 126 thru 163 17.1 MB PDF
Part 4 has the PA deck info, radio disassembly / assembly procedures and the exploded parts lists
Total download of the MaxTrac service manual is 75.3 MB.
Originally this book arrived as a shrink-wrapped pile of 3-hole punched pages - you had to provide your own thick 3-ring binder. The shrink-wrapped stack was slightly over 2 inches tall. Personally, I used a 3.5" (ring diameter) binder to hold this W84 manual, a 900 MHz Trunked manual (complete with the 30 watt Power Amplifier Supplement), a DeskTrac manual, an RSS manual, some web page printouts, and a dozen sheets of 3-hole punched paper with some modification and programming notes.
Ken
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim Duuuude
Sent: Saturday, June 04, 2011 10:40 AM
To: app_rpt mailing list
Subject: [App_rpt-users] maxtrac 300 uhf service manual
Does anyone have a Maxtrac 300 UHF service manual??
I could sure use one. And there do not seem to be any on Ebay.
JIM WB6NIL
To problem, Jim. NO ONE is a dumbass for asking a reasonable question.
Didn't bother me. Anyone?
Bryan WB0YLE
Allstar 27294 etc
Echolink WB0YLE-R
Morrisville PA
Member of the Central NJ Allstar Reflector Empire
On 6/4/2011 12:39 PM, Jim Duuuude wrote:
Thanks..
Ok.. Ill say it. WHY DIDN'T I JUST LOOK THERE FIRST INSTEAD OF BEING A DUMASS AND
BOTHERING EVERYONE??I said it.
JIM WB6NIL