Does the command “eannmode = x” only work in newer distributions such as DIAL? I added this to the rpt.conf on my system as eannmode = 2 but connects are still announced as node number only.
Thanks
Jamey
WR4JW
Yes, I restarted Asterisk. BTW, my system is running ACID
Jamey
WR4JW
···
-----Original Message-----
From: Buddy Brannan [mailto:buddy@brannan.name]
Sent: Tuesday, November 24, 2015 9:27 PM
To: Jamey Wright <jamey.wright@charter.net>
Subject: Re: [App_rpt-users] Echolink Setting
Dumb question:
Did you remember to either restart asterisk or reload your rpt.conf file (rpt reload from the asterisk console, or asterisk -rx "rpt reload")?
--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name
On Nov 24, 2015, at 10:20 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Does the command “eannmode = x” only work in newer distributions such as DIAL? I added this to the rpt.conf on my system as eannmode = 2 but connects are still announced as node number only.
Thanks
Jamey
WR4JW
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Yes, I did.
Jamey
WR4JW
···
From: Steve Agee [mailto:n5zua@earthlink.net]
Sent: Tuesday, November 24, 2015 9:38 PM
To: Jamey Wright jamey.wright@charter.net
Subject: Re: [App_rpt-users] Echolink Setting
Did you "rpt reload" or restart Asterisk after making the changes?
N5ZUA
On 11/24/2015 9:20 PM, Jamey Wright wrote:
Does the command “eannmode = x” only work in newer distributions such as DIAL? I added this to the rpt.conf on my system as eannmode = 2 but connects are still announced as node number only.
Thanks
Jamey
WR4JW
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
[http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users)
To unsubscribe from this list please visit [http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Here is a snip from rpt.conf
[41902] ; Change this to your assigned node number
rxchannel=Zap/pseudo
erxgain=-3
etxgain=3
eannmode=2
;controlstates=controlstates
scheduler=schedule41902
···
-----Original Message-----
From: Buddy Brannan [mailto:buddy@brannan.name]
Sent: Tuesday, November 24, 2015 10:23 PM
To: Jamey Wright <jamey.wright@charter.net>
Subject: Re: [App_rpt-users] Echolink Setting
Hmm. Shouldn't matter. Where in the file did you put the statement? It should be in the section where you're defining your node.
--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name
On Nov 24, 2015, at 11:09 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Yes, I did restart Asterisk. BTW, my system is running ACID.
Jamey
WR4JW-----Original Message-----
From: Buddy Brannan [mailto:buddy@brannan.name]
Sent: Tuesday, November 24, 2015 9:27 PM
To: Jamey Wright <jamey.wright@charter.net>
Subject: Re: [App_rpt-users] Echolink SettingDumb question:
Did you remember to either restart asterisk or reload your rpt.conf file (rpt reload from the asterisk console, or asterisk -rx "rpt reload")?--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.nameOn Nov 24, 2015, at 10:20 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Does the command “eannmode = x” only work in newer distributions such as DIAL? I added this to the rpt.conf on my system as eannmode = 2 but connects are still announced as node number only.
Thanks
Jamey
WR4JW
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Hello Team, I’m running RPi2 and I can seem to get Echolink to work. Does anyone have it running on RPi2??
Thanks, David
KE6UPI
···
On Wed, Nov 25, 2015 at 3:10 PM, Jamey Wright jamey.wright@charter.net wrote:
Here is a snip from rpt.conf
[41902] ; Change this to your assigned node number
rxchannel=Zap/pseudo
erxgain=-3
etxgain=3
eannmode=2
;controlstates=controlstates
scheduler=schedule41902
-----Original Message-----
From: Buddy Brannan [mailto:buddy@brannan.name]
Sent: Tuesday, November 24, 2015 10:23 PM
To: Jamey Wright jamey.wright@charter.net
Subject: Re: [App_rpt-users] Echolink Setting
Hmm. Shouldn’t matter. Where in the file did you put the statement? It should be in the section where you’re defining your node.
–
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name
On Nov 24, 2015, at 11:09 PM, Jamey Wright jamey.wright@charter.net wrote:
Yes, I did restart Asterisk. BTW, my system is running ACID.
Jamey
WR4JW
-----Original Message-----
From: Buddy Brannan [mailto:buddy@brannan.name]
Sent: Tuesday, November 24, 2015 9:27 PM
To: Jamey Wright jamey.wright@charter.net
Subject: Re: [App_rpt-users] Echolink Setting
Dumb question:
Did you remember to either restart asterisk or reload your rpt.conf file (rpt reload from the asterisk console, or asterisk -rx “rpt reload”)?
–
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name
On Nov 24, 2015, at 10:20 PM, Jamey Wright jamey.wright@charter.net wrote:
Does the command “eannmode = x” only work in newer distributions such as DIAL? I added this to the rpt.conf on my system as eannmode = 2 but connects are still announced as node number only.
Thanks
Jamey
WR4JW
App_rpt-users mailing list
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Do you have the echolink.conf setup?
http://ohnosec.org/drupal/node/56
···
On Thu, Nov 26, 2015 at 12:47 AM, David KE6UPI dshaw@ke6upi.com wrote:
Hello Team, I’m running RPi2 and I can seem to get Echolink to work. Does anyone have it running on RPi2??
Thanks, David
KE6UPI
App_rpt-users mailing list
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On Wed, Nov 25, 2015 at 3:10 PM, Jamey Wright jamey.wright@charter.net wrote:
Here is a snip from rpt.conf
[41902] ; Change this to your assigned node number
rxchannel=Zap/pseudo
erxgain=-3
etxgain=3
eannmode=2
;controlstates=controlstates
scheduler=schedule41902
-----Original Message-----
From: Buddy Brannan [mailto:buddy@brannan.name]
Sent: Tuesday, November 24, 2015 10:23 PM
To: Jamey Wright jamey.wright@charter.net
Subject: Re: [App_rpt-users] Echolink Setting
Hmm. Shouldn’t matter. Where in the file did you put the statement? It should be in the section where you’re defining your node.
–
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name
On Nov 24, 2015, at 11:09 PM, Jamey Wright jamey.wright@charter.net wrote:
Yes, I did restart Asterisk. BTW, my system is running ACID.
Jamey
WR4JW
-----Original Message-----
From: Buddy Brannan [mailto:buddy@brannan.name]
Sent: Tuesday, November 24, 2015 9:27 PM
To: Jamey Wright jamey.wright@charter.net
Subject: Re: [App_rpt-users] Echolink Setting
Dumb question:
Did you remember to either restart asterisk or reload your rpt.conf file (rpt reload from the asterisk console, or asterisk -rx “rpt reload”)?
–
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name
On Nov 24, 2015, at 10:20 PM, Jamey Wright jamey.wright@charter.net wrote:
Does the command “eannmode = x” only work in newer distributions such as DIAL? I added this to the rpt.conf on my system as eannmode = 2 but connects are still announced as node number only.
Thanks
Jamey
WR4JW
App_rpt-users mailing list
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thanks Team, Jim you hit the nail on the head…
David
···
On Wed, Nov 25, 2015 at 10:55 PM, Michael Hebert mhebert1975@gmail.com wrote:
Do you have the echolink.conf setup?
On Thu, Nov 26, 2015 at 12:47 AM, David KE6UPI dshaw@ke6upi.com wrote:
Hello Team, I’m running RPi2 and I can seem to get Echolink to work. Does anyone have it running on RPi2??
Thanks, David
KE6UPI
App_rpt-users mailing list
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On Wed, Nov 25, 2015 at 3:10 PM, Jamey Wright jamey.wright@charter.net wrote:
Here is a snip from rpt.conf
[41902] ; Change this to your assigned node number
rxchannel=Zap/pseudo
erxgain=-3
etxgain=3
eannmode=2
;controlstates=controlstates
scheduler=schedule41902
-----Original Message-----
From: Buddy Brannan [mailto:buddy@brannan.name]
Sent: Tuesday, November 24, 2015 10:23 PM
To: Jamey Wright jamey.wright@charter.net
Subject: Re: [App_rpt-users] Echolink Setting
Hmm. Shouldn’t matter. Where in the file did you put the statement? It should be in the section where you’re defining your node.
–
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name
On Nov 24, 2015, at 11:09 PM, Jamey Wright jamey.wright@charter.net wrote:
Yes, I did restart Asterisk. BTW, my system is running ACID.
Jamey
WR4JW
-----Original Message-----
From: Buddy Brannan [mailto:buddy@brannan.name]
Sent: Tuesday, November 24, 2015 9:27 PM
To: Jamey Wright jamey.wright@charter.net
Subject: Re: [App_rpt-users] Echolink Setting
Dumb question:
Did you remember to either restart asterisk or reload your rpt.conf file (rpt reload from the asterisk console, or asterisk -rx “rpt reload”)?
–
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name
On Nov 24, 2015, at 10:20 PM, Jamey Wright jamey.wright@charter.net wrote:
Does the command “eannmode = x” only work in newer distributions such as DIAL? I added this to the rpt.conf on my system as eannmode = 2 but connects are still announced as node number only.
Thanks
Jamey
WR4JW
App_rpt-users mailing list
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.