DIAL using usbradio.conf

Mark_Johnston · October 6, 2015, 7:38am

usbradio config - setup from portal after clean re-install -

now I get this

asterisk -vvvvvvv...

.....

pbx_config.so => (Text Extension Configuration)

Asterisk Ready.

*CLI> == Parsing '/etc/asterisk/rpt.conf': Found

-- Loading initial config for repeater 28344

== Parsing '/etc/asterisk/rpt.conf': Found

[Oct 6 00:26:32] NOTICE[823]: app_rpt.c:21988 rpt_master: Normal Repeater
Init 28344

-- Re-Loading config for repeater 28344

== Parsing '/etc/asterisk/rpt.conf': Found

[Oct 6 00:26:32] WARNING[838]: channel.c:3051 ast_request: No channel type
registered for 'Radio'

rpt:Sorry unable to obtain Rx channel

-- Re-Loading config for repeater 28344

[Oct 6 00:26:32] WARNING[823]: app_rpt.c:22044 rpt_master: rpt_thread
restarted on node 28344

== Parsing '/etc/asterisk/rpt.conf': Found

[Oct 6 00:26:32] WARNING[839]: channel.c:3051 ast_request: No channel type
registered for 'Radio'

rpt:Sorry unable to obtain Rx channel

[Oct 6 00:26:34] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread
restarted on 28344

[Oct 6 00:26:34] WARNING[823]: app_rpt.c:22044 rpt_master: --
Re-Loading config for repeater 28344

rpt_thread restarted on node 28344

== Parsing '/etc/asterisk/rpt.conf': Found

[Oct 6 00:26:34] WARNING[840]: channel.c:3051 ast_request: No channel type
registered for 'Radio'

rpt:Sorry unable to obtain Rx channel

[Oct 6 00:26:36] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread
restarted on 28344

-- Re-Loading config for repeater 28344

== Parsing '/etc/asterisk/rpt.conf': Found

[Oct 6 00:26:36] WARNING[823]: app_rpt.c:22044 rpt_master: rpt_thread
restarted on node 28344

[Oct 6 00:26:36] WARNING[841]: channel.c:3051 ast_request: No channel type
registered for 'Radio'

rpt:Sorry unable to obtain Rx channel

[Oct 6 00:26:38] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread
restarted on 28344

[Oct 6 00:26:38] WARNING[823]: app_rpt.c:22044 rpt_master: rpt_thread
restarted on node 28344

-- Re-Loading config for repeater 28344

== Parsing '/etc/asterisk/rpt.conf': Found

[Oct 6 00:26:38] WARNING[842]: channel.c:3051 ast_request: No channel type
registered for 'Radio'

rpt:Sorry unable to obtain Rx channel

[Oct 6 00:26:40] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread
restarted on 28344

[Oct 6 00:26:40] WARNING[823]: app_rpt.c:22044 rpt_master: rpt_thread
restarted on node 28344

-- Re-Loading config for repeater 28344

== Parsing '/etc/asterisk/rpt.conf': Found

[Oct 6 00:26:40] WARNING[843]: channel.c:3051 ast_request: No channel type
registered for 'Radio'

rpt:Sorry unable to obtain Rx channel

[Oct 6 00:26:42] NOTICE[823]: app_rpt.c:22032 rpt_master: RPT thread
restarted on 28344

[Oct 6 00:26:42] WARNING[823]: app_rpt.c:22044 rpt_master: --
Re-Loading config for repeater 28344

rpt_thread restarted on node 28344

== Parsing '/etc/asterisk/rpt.conf': Found

[Oct 6 00:26:42] WARNING[844]: channel.c:3051 ast_request: No channel type
registered for 'Radio'

rpt:Sorry unable to obtain Rx channel

[Oct 6 00:26:44] ERROR[823]: app_rpt.c:22027 rpt_master: Continual RPT
thread restarts, killing Asterisk

root@KC7DMF-2:/etc/asterisk#

rpt.conf:

[28344] ; Change this to your assigned node
number

rxchannel=Radio/usb28344

duplex=1

erxgain=-3

etxgain=3

;controlstates=controlstates

scheduler=schedule28344

morse=morse28344

macro=macro28344

functions=functions28344

phone_functions=functions28344

link_functions=functions28344

telemetry=telemetry

wait_times=wait-times

context = radio

callerid = "Repeater" <0000000000>

idrecording = |iKC7DMF

accountcode=RADIO

hangtime=100

althangtime=100

totime=170000

idtime=540000

politeid=3000

usbradio.conf

; Usbradio channel driver Configuration File

;

[general]

[usb28344]

hdwtype=0

rxboost=1

txboost=1

rxctcssrelax=1

txctcssdefault=123.0

rxctcssfreqs=123.0

txctcssfreqs=123.0

;rxctcssoverride=0

carrierfrom=usb

ctcssfrom=usb

rxdemod=flat

txprelim=yes

txlimonly=no

txtoctype=notone

txmixa=composite

txmixb=no

invertptt=0

duplex=0

rxondelay=0

rxnoisefiltype=0

eeprom=0

#includeifexists custom/usbradio.conf

there is no usbradio_tune created

when running radio-tune-menu

root@KC7DMF-2:/etc/asterisk# Error parsing device parameters

Anyone have some ideas where I can start with this?

Mark

Szingman2 · October 6, 2015, 9:34am

Mark,

Edit /etc/asterisk/modules.conf

change:
load => chan_simpleusb.so ;��� ��� ��� Simple USB Radio Interface

Channel Drive��

noload => chan_simpleusb.so ;����������� Simple USB Radio

Interface Channel Drive

and

noload => chan_usbradio.so ;��� ��� ��� USB Console Channel

Driver��

load => chan_usbradio.so ;��� ��� ��� USB Console Channel Driver

···

In other words, disable the simpleusb channel driver and enable
chanusbradio channel driver.

  73, Steve N4IRS

  On 10/06/2015 03:38 AM, Mark Johnston wrote:

          usbradio config - setup from portal after clean

re-install -

now I get this

asterisk -vvvvvvv…

…

            pbx_config.so => (Text

Extension Configuration)

Asterisk Ready.

            *CLI> � == Parsing
‘/etc/asterisk/rpt.conf’: Found

            � � -- Loading initial config for

repeater 28344

            � == Parsing
‘/etc/asterisk/rpt.conf’: Found

            [Oct� 6 00:26:32] NOTICE[823]:
app_rpt.c:21988 rpt_master: Normal Repeater Init� 28344
� �

            � � -- Re-Loading config for

repeater 28344

            � == Parsing
‘/etc/asterisk/rpt.conf’: Found

            [Oct� 6 00:26:32] WARNING[838]:
channel.c:3051 ast_request: No channel type registered
for ‘Radio’

            rpt:Sorry unable to obtain Rx

channel

            � � -- Re-Loading config for

repeater 28344

            [Oct� 6 00:26:32] WARNING[823]:
app_rpt.c:22044 rpt_master: rpt_thread restarted on node
28344

            � == Parsing
‘/etc/asterisk/rpt.conf’: Found

            [Oct� 6 00:26:32] WARNING[839]:
channel.c:3051 ast_request: No channel type registered
for ‘Radio’

            rpt:Sorry unable to obtain Rx

channel

            [Oct� 6 00:26:34] NOTICE[823]:
app_rpt.c:22032 rpt_master: RPT thread restarted on
28344

            [Oct� 6 00:26:34] WARNING[823]:
app_rpt.c:22044 rpt_master: � � – Re-Loading config for
repeater 28344

            rpt_thread restarted on node

28344

            � == Parsing
‘/etc/asterisk/rpt.conf’: Found

            [Oct� 6 00:26:34] WARNING[840]:
channel.c:3051 ast_request: No channel type registered
for ‘Radio’

            rpt:Sorry unable to obtain Rx

channel

            [Oct� 6 00:26:36] NOTICE[823]:
app_rpt.c:22032 rpt_master: RPT thread restarted on
28344

            � � -- Re-Loading config for

repeater 28344

            � == Parsing
‘/etc/asterisk/rpt.conf’: Found

            [Oct� 6 00:26:36] WARNING[823]:
app_rpt.c:22044 rpt_master: rpt_thread restarted on node
28344

            [Oct� 6 00:26:36] WARNING[841]:
channel.c:3051 ast_request: No channel type registered
for ‘Radio’

            rpt:Sorry unable to obtain Rx

channel

            [Oct� 6 00:26:38] NOTICE[823]:
app_rpt.c:22032 rpt_master: RPT thread restarted on
28344

            [Oct� 6 00:26:38] WARNING[823]:
app_rpt.c:22044 rpt_master: rpt_thread restarted on node
28344

            � � -- Re-Loading config for

repeater 28344

            � == Parsing
‘/etc/asterisk/rpt.conf’: Found

            [Oct� 6 00:26:38] WARNING[842]:
channel.c:3051 ast_request: No channel type registered
for ‘Radio’

            rpt:Sorry unable to obtain Rx

channel

            [Oct� 6 00:26:40] NOTICE[823]:
app_rpt.c:22032 rpt_master: RPT thread restarted on
28344

            [Oct� 6 00:26:40] WARNING[823]:
app_rpt.c:22044 rpt_master: rpt_thread restarted on node
28344

            � � -- Re-Loading config for

repeater 28344

            � == Parsing
‘/etc/asterisk/rpt.conf’: Found

            [Oct� 6 00:26:40] WARNING[843]:
channel.c:3051 ast_request: No channel type registered
for ‘Radio’

            rpt:Sorry unable to obtain Rx

channel

            [Oct� 6 00:26:42] NOTICE[823]:
app_rpt.c:22032 rpt_master: RPT thread restarted on
28344

            [Oct� 6 00:26:42] WARNING[823]:
app_rpt.c:22044 rpt_master: � � – Re-Loading config for
repeater 28344

            rpt_thread restarted on node

28344

            � == Parsing
‘/etc/asterisk/rpt.conf’: Found

            [Oct� 6 00:26:42] WARNING[844]:
channel.c:3051 ast_request: No channel type registered
for ‘Radio’

            rpt:Sorry unable to obtain Rx

channel

            [Oct� 6 00:26:44] ERROR[823]:
app_rpt.c:22027 rpt_master: Continual RPT thread
restarts, killing Asterisk

root@KC7DMF-2:/etc/asterisk#�

rpt.conf:

          [28344] � � � � � � � � � � � � � � � � ; Change

this to your assigned node number

rxchannel=Radio/usb28344

duplex=1

erxgain=-3

etxgain=3

;controlstates=controlstates

scheduler=schedule28344

morse=morse28344

macro=macro28344

functions=functions28344

phone_functions=functions28344

link_functions=functions28344

telemetry=telemetry

wait_times=wait-times

context = �radio

callerid = “Repeater” <0000000000>

idrecording = |iKC7DMF

accountcode=RADIO

hangtime=100

althangtime=100

totime=170000

idtime=540000

politeid=3000

usbradio.conf

            ; Usbradio channel driver

Configuration File

;

[general]

[usb28344]

hdwtype=0

rxboost=1

txboost=1

rxctcssrelax=1

txctcssdefault=123.0

rxctcssfreqs=123.0

txctcssfreqs=123.0

;rxctcssoverride=0

carrierfrom=usb

ctcssfrom=usb

rxdemod=flat

txprelim=yes

txlimonly=no

txtoctype=notone

txmixa=composite

txmixb=no

invertptt=0

duplex=0

rxondelay=0

rxnoisefiltype=0

eeprom=0

            #includeifexists

custom/usbradio.conf

          there is no usbradio_tune

created

when running radio-tune-menu

            root@KC7DMF-2:/etc/asterisk#
Error parsing device parameters

            Anyone have some ideas where I

can start with this?

Mark




_______________________________________________
App_rpt-users mailing list
To unsubscribe from this list please visit and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- "Anything is possible if you don't know what you are talking about."
1st Law of Logic

App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

Mark_Johnston · October 6, 2015, 4:17pm

After changing the noload and load options - plus a couple of reboots, why
one wasn't enough, I have no idea,
so far so good - except for waiting to see if my node will show up in the
/etc...../rpt_extnodes hopefully

Also wondered if there was more documentation on the modules you can load?
How to use them - I see there is a voicemail one and icecast etc, just
curious how some of those would work... they appear to be new for those
coming from ACID.

Thanks,

Mark

Szingman2 · October 6, 2015, 4:24pm

Mark,
It's in <http://stats.allstarlink.org/> Showing up for about 12 min.
Also in rpt_extnodes

73, Steve N4IRS

···

On 10/6/2015 12:17 PM, Mark Johnston wrote:

After changing the noload and load options - plus a couple of reboots, why one wasn't enough, I have no idea,
so far so good - except for waiting to see if my node will show up in the /etc...../rpt_extnodes hopefully

Also wondered if there was more documentation on the modules you can load? How to use them - I see there is a voicemail one and icecast etc, just curious how some of those would work... they appear to be new for those coming from ACID.

Thanks,

Mark

Szingman2 · October 6, 2015, 4:26pm

Actually they are the same modules as ACID.
All I did was break out the loading and noload rather then load all except...

Steve

···

On 10/6/2015 12:17 PM, Mark Johnston wrote:

After changing the noload and load options - plus a couple of reboots, why one wasn't enough, I have no idea,
so far so good - except for waiting to see if my node will show up in the /etc...../rpt_extnodes hopefully

Also wondered if there was more documentation on the modules you can load? How to use them - I see there is a voicemail one and icecast etc, just curious how some of those would work... they appear to be new for those coming from ACID.

Thanks,

Mark