Would it be possible to get the DIAL install to enable serial console during
install and after installation?
I run all my systems headless and actually had an issue finding a monitor
yesterday to install on a non server hardware lacking IPMI/iLO. Serial would
be a nice to have on ttyS0, 115200n8 by default.
Thoughts?
I'll second that motion...
On Mon, Apr 4, 2016 at 5:04 PM, Bryan Fields <Bryan@bryanfields.net> wrote:
Would it be possible to get the DIAL install to enable serial console during
install and after installation?I run all my systems headless and actually had an issue finding a monitor
yesterday to install on a non server hardware lacking IPMI/iLO. Serial would
be a nice to have on ttyS0, 115200n8 by default.Thoughts?
--
Bryan Fields727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
The current (new) version of Dial for the RPiX has a new script, that, when booted,
"says" the obtained IP address out the built-in audio line out jack. That way, it can
"tell" you what its IP address is.
Jim
________________________________________
From: app_rpt-users-bounces@ohnosec.org <app_rpt-users-bounces@ohnosec.org> on behalf of Joe Bennett <aprs@ka3nam.com>
Sent: Monday, April 4, 2016 3:44 PM
Cc: APP RPT
Subject: Re: [App_rpt-users] DIAL serial console?
I'll second that motion...
On Mon, Apr 4, 2016 at 5:04 PM, Bryan Fields <Bryan@bryanfields.net> wrote:
Would it be possible to get the DIAL install to enable serial console during
install and after installation?I run all my systems headless and actually had an issue finding a monitor
yesterday to install on a non server hardware lacking IPMI/iLO. Serial would
be a nice to have on ttyS0, 115200n8 by default.Thoughts?
--
Bryan Fields727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On what hardware platform would you like a serial console available?
On 04/04/2016 06:44 PM, Joe Bennett wrote:
I'll second that motion...
On Mon, Apr 4, 2016 at 5:04 PM, Bryan Fields <Bryan@bryanfields.net> wrote:
Would it be possible to get the DIAL install to enable serial console during
install and after installation?I run all my systems headless and actually had an issue finding a monitor
yesterday to install on a non server hardware lacking IPMI/iLO. Serial would
be a nice to have on ttyS0, 115200n8 by default.Thoughts?
--
Bryan Fields727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem._______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
I also run all my servers headless. The RPi2 has ttyAMA0 enable at boot.
On the x86 machines, I'll look into it for the next rev.
On 04/04/2016 06:04 PM, Bryan Fields wrote:
Would it be possible to get the DIAL install to enable serial console during
install and after installation?I run all my systems headless and actually had an issue finding a monitor
yesterday to install on a non server hardware lacking IPMI/iLO. Serial would
be a nice to have on ttyS0, 115200n8 by default.Thoughts?
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
Thanks, it's really easy, just add this in /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="console=tty0 console=ttyS0,115200n8"
GRUB_CMDLINE_LINUX="boolean true console=tty0 console=ttyS0,115200n8"
GRUB_TERMINAL=serial
GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"
I don't run the rpi images, guess I'm old school like that with my RTCMs and
pciradio cards. They sound great btw.
On 4/4/16 7:15 PM, Steve Zingman wrote:
On the x86 machines, I'll look into it for the next rev.
--
Bryan Fields
727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net
Yes,
That will work for once DIAL has installed and before it builds DAHDI and asterisk. I'll look into having the installer startup a serial console.
On 04/04/2016 07:30 PM, Bryan Fields wrote:
On 4/4/16 7:15 PM, Steve Zingman wrote:
On the x86 machines, I'll look into it for the next rev.
Thanks, it's really easy, just add this in /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="console=tty0 console=ttyS0,115200n8"
GRUB_CMDLINE_LINUX="boolean true console=tty0 console=ttyS0,115200n8"GRUB_TERMINAL=serial
GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"I don't run the rpi images, guess I'm old school like that with my RTCMs and
pciradio cards. They sound great btw.
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
x86 for me... RPi's will eventually happen, but not right now...
-Joe
KA3NAM
On Mon, Apr 4, 2016 at 6:15 PM, Steve Zingman <szingman@msgstor.com> wrote:
I also run all my servers headless. The RPi2 has ttyAMA0 enable at boot.
On the x86 machines, I'll look into it for the next rev.On 04/04/2016 06:04 PM, Bryan Fields wrote:
Would it be possible to get the DIAL install to enable serial console
during
install and after installation?I run all my systems headless and actually had an issue finding a monitor
yesterday to install on a non server hardware lacking IPMI/iLO. Serial
would
be a nice to have on ttyS0, 115200n8 by default.Thoughts?
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.