Enable Chan_USB in /etc/asterisk/modules.conf
···
On Mar 16, 2016 3:08 AM, David Osborn david.osborn@manx.net wrote:
Hello all,
I’ve finally got around to setting-up a Dial installation on an RPi2 and hit
a snag:
The image boots as it should and I end up with Asterisk running and the LED
flashing on the USB dongle (which has been used without difficulty on a
PC-based installation for some time).
Here’s the first problem:
root@peel:/etc/asterisk# /usr/sbin/radio-tune-menu
Error parsing device parameters
root@peel:/etc/asterisk#
The second thing is that I’d like to use full-fat ChanUSB, using DSP for
everything. I set “rxchannel = Radio/usb” in rpt.conf, but Asterisk takes
great exception to that complaining that it can’t find the channel driver.
So, what would upset radio-tune-menu and how to use ChanUSB?
As always, I’ll be missing something obvious. Thanks.
App_rpt-users mailing list
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.