Hi all,
I downloaded and installed the DIAL image for the RPi2 and it went in a
treat. Great work guys!
What I did next broke it, but it is something that we all have to do and
I've done it many times with my Acid installs: I did an update to the
system.
Just as with Acid, the updates broke Asterisk and it craps out after a few
tries:
[Jan 9 14:34:48] WARNING[300] chan_dahdi.c: Unable to open
'/dev/dahdi/pseudo': No such file or directory
[Jan 9 14:34:48] ERROR[300] chan_dahdi.c: Unable to dup channel: No such
file or directory
[Jan 9 14:34:48] WARNING[301] chan_simpleusb.c: File
simpleusb_tune_usb.conf not found, device usb using default parameters.
[Jan 9 14:34:50] ERROR[269] app_rpt.c: Continual RPT thread restarts,
killing Asterisk
I am guessing that Asterisk etc needs to be re-compiled. How do I go about
this? I tried running the rpi2 install script at
https://github.com/N4IRS/AllStar and answered "n" to repeated queries about
patches. Compilation appeared to succeed, but Asterisk still dies on me.
Thanks again for the work on this. I'm most impressed with the RPI2!
David Osborn
GD4HOZ
David,
cd /usr/src/astsrc-1.4.23-pre/dahdi-linux-complete
make clean
make all
make install
make config
73, Steve N4IRS
···
On 01/09/2016 09:46 AM, David Osborn wrote:
Hi all,
I downloaded and installed the DIAL image for the RPi2 and it went in a
treat. Great work guys!
What I did next broke it, but it is something that we all have to do and
I've done it many times with my Acid installs: I did an update to the
system.
Just as with Acid, the updates broke Asterisk and it craps out after a few
tries:
[Jan 9 14:34:48] WARNING[300] chan_dahdi.c: Unable to open
'/dev/dahdi/pseudo': No such file or directory
[Jan 9 14:34:48] ERROR[300] chan_dahdi.c: Unable to dup channel: No such
file or directory
[Jan 9 14:34:48] WARNING[301] chan_simpleusb.c: File
simpleusb_tune_usb.conf not found, device usb using default parameters.
[Jan 9 14:34:50] ERROR[269] app_rpt.c: Continual RPT thread restarts,
killing Asterisk
I am guessing that Asterisk etc needs to be re-compiled. How do I go about
this? I tried running the rpi2 install script at
https://github.com/N4IRS/AllStar and answered "n" to repeated queries about
patches. Compilation appeared to succeed, but Asterisk still dies on me.
Thanks again for the work on this. I'm most impressed with the RPI2!
David Osborn
GD4HOZ
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
Thank you so much for the swift response, Steve. That's really appreciated.
Unfortunately it's still in the wars 
root@pi_repeater:/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete# make clean
make -C linux clean
make[1]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make -C drivers/dahdi/firmware clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/firmwar
e'
rm -f dahdi-fw-*.o
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/firmwar
e'
make -C
M='/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/oct61
2x' clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make[2]: ***
M=/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/oct612
x: No such file or directory. Stop.
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:179: recipe for target 'clean' failed
make[1]: *** [clean] Error 2
make[1]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:14: recipe for target 'clean' failed
make: *** [clean] Error 2
I fell at the first hurdle. The directory oct612x does exist, however, and
it contains files.
Any thoughts?
···
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 14:51
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
David,
cd /usr/src/astsrc-1.4.23-pre/dahdi-linux-complete
make clean
make all
make install
make config
73, Steve N4IRS
On 01/09/2016 09:46 AM, David Osborn wrote:
Hi all,
I downloaded and installed the DIAL image for the RPi2 and it went in
a treat. Great work guys!
What I did next broke it, but it is something that we all have to do
and I've done it many times with my Acid installs: I did an update to
the system.
Just as with Acid, the updates broke Asterisk and it craps out after a
few
tries:
[Jan 9 14:34:48] WARNING[300] chan_dahdi.c: Unable to open
'/dev/dahdi/pseudo': No such file or directory [Jan 9 14:34:48]
ERROR[300] chan_dahdi.c: Unable to dup channel: No such file or
directory [Jan 9 14:34:48] WARNING[301] chan_simpleusb.c: File
simpleusb_tune_usb.conf not found, device usb using default parameters.
[Jan 9 14:34:50] ERROR[269] app_rpt.c: Continual RPT thread restarts,
killing Asterisk
I am guessing that Asterisk etc needs to be re-compiled. How do I go
about this? I tried running the rpi2 install script at
https://github.com/N4IRS/AllStar and answered "n" to repeated queries
about patches. Compilation appeared to succeed, but Asterisk still dies on
me.
Thanks again for the work on this. I'm most impressed with the RPI2!
David Osborn
GD4HOZ
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
David,
Not sure why you are getting the error. Lets go further. Worst case, you have to reload the image.
verify you have dahdi-linux-complete-current.tar.gz in /srv/download
if not:
cd /srv/download
wget https://github.com/N4IRS/AllStar/raw/master/dahdi-linux-complete-current.tar.gz
cd /usr/src/astsrc-1.4.23-pre
rm -rf dahdi-linux-complete
tar zxvf /srv/download/dahdi-linux-complete-current.tar.gz
mv dahdi-linux-complete* dahdi-linux-complete
/srv/scripts/build_dahdi.sh
Steve
···
On 01/09/2016 09:59 AM, David Osborn wrote:
Thank you so much for the swift response, Steve. That's really appreciated.
Unfortunately it's still in the wars
root@pi_repeater:/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete# make clean
make -C linux clean
make[1]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make -C drivers/dahdi/firmware clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/firmwar
e'
rm -f dahdi-fw-*.o
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/firmwar
e'
make -C
M='/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/oct61
2x' clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make[2]: ***
M=/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/oct612
x: No such file or directory. Stop.
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:179: recipe for target 'clean' failed
make[1]: *** [clean] Error 2
make[1]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:14: recipe for target 'clean' failed
make: *** [clean] Error 2
I fell at the first hurdle. The directory oct612x does exist, however, and
it contains files.
Any thoughts?
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 14:51
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
David,
cd /usr/src/astsrc-1.4.23-pre/dahdi-linux-complete
make clean
make all
make install
make config
73, Steve N4IRS
On 01/09/2016 09:46 AM, David Osborn wrote:
Hi all,
I downloaded and installed the DIAL image for the RPi2 and it went in
a treat. Great work guys!
What I did next broke it, but it is something that we all have to do
and I've done it many times with my Acid installs: I did an update to
the system.
Just as with Acid, the updates broke Asterisk and it craps out after a
few
tries:
[Jan 9 14:34:48] WARNING[300] chan_dahdi.c: Unable to open
'/dev/dahdi/pseudo': No such file or directory [Jan 9 14:34:48]
ERROR[300] chan_dahdi.c: Unable to dup channel: No such file or
directory [Jan 9 14:34:48] WARNING[301] chan_simpleusb.c: File
simpleusb_tune_usb.conf not found, device usb using default parameters.
[Jan 9 14:34:50] ERROR[269] app_rpt.c: Continual RPT thread restarts,
killing Asterisk
I am guessing that Asterisk etc needs to be re-compiled. How do I go
about this? I tried running the rpi2 install script at
https://github.com/N4IRS/AllStar and answered "n" to repeated queries
about patches. Compilation appeared to succeed, but Asterisk still dies on
me.
Thanks again for the work on this. I'm most impressed with the RPI2!
David Osborn
GD4HOZ
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
This may hold the key:
"You do not appear to have the sources for the 4.0.7-v7+ kernel installed"
Now all I have to do is find the aforementioned sources! An apt-cache search
doesn't show anything as modern as that.
David
···
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 15:11
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
David,
Not sure why you are getting the error. Lets go further. Worst case, you
have to reload the image.
verify you have dahdi-linux-complete-current.tar.gz in /srv/download if not:
cd /srv/download
wget
https://github.com/N4IRS/AllStar/raw/master/dahdi-linux-complete-current.tar
.gz
cd /usr/src/astsrc-1.4.23-pre
rm -rf dahdi-linux-complete
tar zxvf /srv/download/dahdi-linux-complete-current.tar.gz
mv dahdi-linux-complete* dahdi-linux-complete /srv/scripts/build_dahdi.sh
Steve
On 01/09/2016 09:59 AM, David Osborn wrote:
Thank you so much for the swift response, Steve. That's really
appreciated.
Unfortunately it's still in the wars
root@pi_repeater:/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete# make
clean make -C linux clean
make[1]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make -C drivers/dahdi/firmware clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/f
irmwar
e'
rm -f dahdi-fw-*.o
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/f
irmwar
e'
make -C
M='/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi
/oct61
2x' clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make[2]: ***
M=/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/
oct612
x: No such file or directory. Stop.
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:179: recipe for target 'clean' failed
make[1]: *** [clean] Error 2
make[1]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:14: recipe for target 'clean' failed
make: *** [clean] Error 2
I fell at the first hurdle. The directory oct612x does exist, however,
and it contains files.
Any thoughts?
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 14:51
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
David,
cd /usr/src/astsrc-1.4.23-pre/dahdi-linux-complete
make clean
make all
make install
make config
73, Steve N4IRS
On 01/09/2016 09:46 AM, David Osborn wrote:
Hi all,
I downloaded and installed the DIAL image for the RPi2 and it went in
a treat. Great work guys!
What I did next broke it, but it is something that we all have to do
and I've done it many times with my Acid installs: I did an update to
the system.
Just as with Acid, the updates broke Asterisk and it craps out after
a few
tries:
[Jan 9 14:34:48] WARNING[300] chan_dahdi.c: Unable to open
'/dev/dahdi/pseudo': No such file or directory [Jan 9 14:34:48]
ERROR[300] chan_dahdi.c: Unable to dup channel: No such file or
directory [Jan 9 14:34:48] WARNING[301] chan_simpleusb.c: File
simpleusb_tune_usb.conf not found, device usb using default parameters.
[Jan 9 14:34:50] ERROR[269] app_rpt.c: Continual RPT thread
restarts, killing Asterisk
I am guessing that Asterisk etc needs to be re-compiled. How do I go
about this? I tried running the rpi2 install script at
https://github.com/N4IRS/AllStar and answered "n" to repeated queries
about patches. Compilation appeared to succeed, but Asterisk still
dies on
me.
Thanks again for the work on this. I'm most impressed with the RPI2!
David Osborn
GD4HOZ
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
down to the bottom of the page. Enter your email address and press the
"Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message
to the list detailing the problem.
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
That would explain it. How did you upgrade the kernel to 4.x?
···
On 01/09/2016 10:53 AM, David Osborn wrote:
This may hold the key:
"You do not appear to have the sources for the 4.0.7-v7+ kernel installed"
Now all I have to do is find the aforementioned sources! An apt-cache search
doesn't show anything as modern as that.
David
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 15:11
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
David,
Not sure why you are getting the error. Lets go further. Worst case, you
have to reload the image.
verify you have dahdi-linux-complete-current.tar.gz in /srv/download if not:
cd /srv/download
wget
https://github.com/N4IRS/AllStar/raw/master/dahdi-linux-complete-current.tar
.gz
cd /usr/src/astsrc-1.4.23-pre
rm -rf dahdi-linux-complete
tar zxvf /srv/download/dahdi-linux-complete-current.tar.gz
mv dahdi-linux-complete* dahdi-linux-complete /srv/scripts/build_dahdi.sh
Steve
On 01/09/2016 09:59 AM, David Osborn wrote:
Thank you so much for the swift response, Steve. That's really
appreciated.
Unfortunately it's still in the wars
root@pi_repeater:/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete# make
clean make -C linux clean
make[1]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make -C drivers/dahdi/firmware clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/f
irmwar
e'
rm -f dahdi-fw-*.o
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/f
irmwar
e'
make -C
M='/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi
/oct61
2x' clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make[2]: ***
M=/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/
oct612
x: No such file or directory. Stop.
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:179: recipe for target 'clean' failed
make[1]: *** [clean] Error 2
make[1]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:14: recipe for target 'clean' failed
make: *** [clean] Error 2
I fell at the first hurdle. The directory oct612x does exist, however,
and it contains files.
Any thoughts?
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 14:51
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
David,
cd /usr/src/astsrc-1.4.23-pre/dahdi-linux-complete
make clean
make all
make install
make config
73, Steve N4IRS
On 01/09/2016 09:46 AM, David Osborn wrote:
Hi all,
I downloaded and installed the DIAL image for the RPi2 and it went in
a treat. Great work guys!
What I did next broke it, but it is something that we all have to do
and I've done it many times with my Acid installs: I did an update to
the system.
Just as with Acid, the updates broke Asterisk and it craps out after
a few
tries:
[Jan 9 14:34:48] WARNING[300] chan_dahdi.c: Unable to open
'/dev/dahdi/pseudo': No such file or directory [Jan 9 14:34:48]
ERROR[300] chan_dahdi.c: Unable to dup channel: No such file or
directory [Jan 9 14:34:48] WARNING[301] chan_simpleusb.c: File
simpleusb_tune_usb.conf not found, device usb using default parameters.
[Jan 9 14:34:50] ERROR[269] app_rpt.c: Continual RPT thread
restarts, killing Asterisk
I am guessing that Asterisk etc needs to be re-compiled. How do I go
about this? I tried running the rpi2 install script at
https://github.com/N4IRS/AllStar and answered "n" to repeated queries
about patches. Compilation appeared to succeed, but Asterisk still
dies on
me.
Thanks again for the work on this. I'm most impressed with the RPI2!
David Osborn
GD4HOZ
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
down to the bottom of the page. Enter your email address and press the
"Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message
to the list detailing the problem.
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
More by accident than design it would seem. I have a notion to run this box
with a 2.8" touchscreen and will be trying to get X running alongside
AllStar (ever the optimist). The idea being to create a user interface for a
portable repeater / emergency box thingy. Following the instructions here
https://github.com/watterott/RPi-Display/blob/master/docu/FBTFT-Install.md
is what led to the upgrade.
I'm probably trying to sprint before I can walk 
Perhaps I'll start again. It only takes a few minutes to burn a fresh image.
Then I'll take smaller steps to see where I'm screwing things up.
Thanks
···
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 16:12
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
That would explain it. How did you upgrade the kernel to 4.x?
On 01/09/2016 10:53 AM, David Osborn wrote:
This may hold the key:
"You do not appear to have the sources for the 4.0.7-v7+ kernel installed"
Now all I have to do is find the aforementioned sources! An apt-cache
search doesn't show anything as modern as that.
David
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 15:11
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
David,
Not sure why you are getting the error. Lets go further. Worst case,
you have to reload the image.
verify you have dahdi-linux-complete-current.tar.gz in /srv/download if
not:
cd /srv/download
wget
https://github.com/N4IRS/AllStar/raw/master/dahdi-linux-complete-curre
nt.tar
.gz
cd /usr/src/astsrc-1.4.23-pre
rm -rf dahdi-linux-complete
tar zxvf /srv/download/dahdi-linux-complete-current.tar.gz
mv dahdi-linux-complete* dahdi-linux-complete
/srv/scripts/build_dahdi.sh
Steve
On 01/09/2016 09:59 AM, David Osborn wrote:
Thank you so much for the swift response, Steve. That's really
appreciated.
Unfortunately it's still in the wars
root@pi_repeater:/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete#
make clean make -C linux clean
make[1]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make -C drivers/dahdi/firmware clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/
f
irmwar
e'
rm -f dahdi-fw-*.o
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/
f
irmwar
e'
make -C
M='/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahd
i
/oct61
2x' clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make[2]: ***
M=/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi
/
oct612
x: No such file or directory. Stop.
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:179: recipe for target 'clean' failed
make[1]: *** [clean] Error 2
make[1]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:14: recipe for target 'clean' failed
make: *** [clean] Error 2
I fell at the first hurdle. The directory oct612x does exist,
however, and it contains files.
Any thoughts?
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 14:51
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
David,
cd /usr/src/astsrc-1.4.23-pre/dahdi-linux-complete
make clean
make all
make install
make config
73, Steve N4IRS
On 01/09/2016 09:46 AM, David Osborn wrote:
Hi all,
I downloaded and installed the DIAL image for the RPi2 and it went
in a treat. Great work guys!
What I did next broke it, but it is something that we all have to do
and I've done it many times with my Acid installs: I did an update
to the system.
Just as with Acid, the updates broke Asterisk and it craps out after
a few
tries:
[Jan 9 14:34:48] WARNING[300] chan_dahdi.c: Unable to open
'/dev/dahdi/pseudo': No such file or directory [Jan 9 14:34:48]
ERROR[300] chan_dahdi.c: Unable to dup channel: No such file or
directory [Jan 9 14:34:48] WARNING[301] chan_simpleusb.c: File
simpleusb_tune_usb.conf not found, device usb using default parameters.
[Jan 9 14:34:50] ERROR[269] app_rpt.c: Continual RPT thread
restarts, killing Asterisk
I am guessing that Asterisk etc needs to be re-compiled. How do I go
about this? I tried running the rpi2 install script at
https://github.com/N4IRS/AllStar and answered "n" to repeated
queries about patches. Compilation appeared to succeed, but Asterisk
still dies on
me.
Thanks again for the work on this. I'm most impressed with the RPI2!
David Osborn
GD4HOZ
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
down to the bottom of the page. Enter your email address and press
the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a
message to the list detailing the problem.
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
OK,
The first thing I checked that apt-get upgrade did not upgrade the kernel. You should be able to add X to DIAL. I can't say I've done it. The touch screen display sounds fun. Good luck and feel free to ask for anything. That's why it's a hobby.
73, Steve N4IRS
···
On 01/09/2016 11:18 AM, David Osborn wrote:
More by accident than design it would seem. I have a notion to run this box
with a 2.8" touchscreen and will be trying to get X running alongside
AllStar (ever the optimist). The idea being to create a user interface for a
portable repeater / emergency box thingy. Following the instructions here
https://github.com/watterott/RPi-Display/blob/master/docu/FBTFT-Install.md
is what led to the upgrade.
I'm probably trying to sprint before I can walk
Perhaps I'll start again. It only takes a few minutes to burn a fresh image.
Then I'll take smaller steps to see where I'm screwing things up.
Thanks
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 16:12
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
That would explain it. How did you upgrade the kernel to 4.x?
On 01/09/2016 10:53 AM, David Osborn wrote:
This may hold the key:
"You do not appear to have the sources for the 4.0.7-v7+ kernel installed"
Now all I have to do is find the aforementioned sources! An apt-cache
search doesn't show anything as modern as that.
David
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 15:11
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
David,
Not sure why you are getting the error. Lets go further. Worst case,
you have to reload the image.
verify you have dahdi-linux-complete-current.tar.gz in /srv/download if
not:
cd /srv/download
wget
https://github.com/N4IRS/AllStar/raw/master/dahdi-linux-complete-curre
nt.tar
.gz
cd /usr/src/astsrc-1.4.23-pre
rm -rf dahdi-linux-complete
tar zxvf /srv/download/dahdi-linux-complete-current.tar.gz
mv dahdi-linux-complete* dahdi-linux-complete
/srv/scripts/build_dahdi.sh
Steve
On 01/09/2016 09:59 AM, David Osborn wrote:
Thank you so much for the swift response, Steve. That's really
appreciated.
Unfortunately it's still in the wars
root@pi_repeater:/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete#
make clean make -C linux clean
make[1]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make -C drivers/dahdi/firmware clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/
f
irmwar
e'
rm -f dahdi-fw-*.o
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/
f
irmwar
e'
make -C
M='/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahd
i
/oct61
2x' clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make[2]: ***
M=/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi
/
oct612
x: No such file or directory. Stop.
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:179: recipe for target 'clean' failed
make[1]: *** [clean] Error 2
make[1]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:14: recipe for target 'clean' failed
make: *** [clean] Error 2
I fell at the first hurdle. The directory oct612x does exist,
however, and it contains files.
Any thoughts?
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 14:51
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
David,
cd /usr/src/astsrc-1.4.23-pre/dahdi-linux-complete
make clean
make all
make install
make config
73, Steve N4IRS
On 01/09/2016 09:46 AM, David Osborn wrote:
Hi all,
I downloaded and installed the DIAL image for the RPi2 and it went
in a treat. Great work guys!
What I did next broke it, but it is something that we all have to do
and I've done it many times with my Acid installs: I did an update
to the system.
Just as with Acid, the updates broke Asterisk and it craps out after
a few
tries:
[Jan 9 14:34:48] WARNING[300] chan_dahdi.c: Unable to open
'/dev/dahdi/pseudo': No such file or directory [Jan 9 14:34:48]
ERROR[300] chan_dahdi.c: Unable to dup channel: No such file or
directory [Jan 9 14:34:48] WARNING[301] chan_simpleusb.c: File
simpleusb_tune_usb.conf not found, device usb using default parameters.
[Jan 9 14:34:50] ERROR[269] app_rpt.c: Continual RPT thread
restarts, killing Asterisk
I am guessing that Asterisk etc needs to be re-compiled. How do I go
about this? I tried running the rpi2 install script at
https://github.com/N4IRS/AllStar and answered "n" to repeated
queries about patches. Compilation appeared to succeed, but Asterisk
still dies on
me.
Thanks again for the work on this. I'm most impressed with the RPI2!
David Osborn
GD4HOZ
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
down to the bottom of the page. Enter your email address and press
the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a
message to the list detailing the problem.
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
I'll carry on hacking. Thanks for trying.
In parting, see what these dudes are up to - you'll love it! (It's what I'd
like to do with a Pi)
http://www.feednet.org.uk/repeater.htm
David
···
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 16:23
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
OK,
The first thing I checked that apt-get upgrade did not upgrade the kernel.
You should be able to add X to DIAL. I can't say I've done it.
The touch screen display sounds fun. Good luck and feel free to ask for
anything. That's why it's a hobby.
73, Steve N4IRS
On 01/09/2016 11:18 AM, David Osborn wrote:
More by accident than design it would seem. I have a notion to run
this box with a 2.8" touchscreen and will be trying to get X running
alongside AllStar (ever the optimist). The idea being to create a user
interface for a portable repeater / emergency box thingy. Following
the instructions here
https://github.com/watterott/RPi-Display/blob/master/docu/FBTFT-Instal
l.md
is what led to the upgrade.
I'm probably trying to sprint before I can walk
Perhaps I'll start again. It only takes a few minutes to burn a fresh
image.
Then I'll take smaller steps to see where I'm screwing things up.
Thanks
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 16:12
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
That would explain it. How did you upgrade the kernel to 4.x?
On 01/09/2016 10:53 AM, David Osborn wrote:
This may hold the key:
"You do not appear to have the sources for the 4.0.7-v7+ kernel
installed"
Now all I have to do is find the aforementioned sources! An apt-cache
search doesn't show anything as modern as that.
David
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 15:11
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
David,
Not sure why you are getting the error. Lets go further. Worst case,
you have to reload the image.
verify you have dahdi-linux-complete-current.tar.gz in /srv/download
if
not:
cd /srv/download
wget
https://github.com/N4IRS/AllStar/raw/master/dahdi-linux-complete-curr
e
nt.tar
.gz
cd /usr/src/astsrc-1.4.23-pre
rm -rf dahdi-linux-complete
tar zxvf /srv/download/dahdi-linux-complete-current.tar.gz
mv dahdi-linux-complete* dahdi-linux-complete
/srv/scripts/build_dahdi.sh
Steve
On 01/09/2016 09:59 AM, David Osborn wrote:
Thank you so much for the swift response, Steve. That's really
appreciated.
Unfortunately it's still in the wars
root@pi_repeater:/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete#
make clean make -C linux clean
make[1]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make -C drivers/dahdi/firmware clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi
/
f
irmwar
e'
rm -f dahdi-fw-*.o
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi
/
f
irmwar
e'
make -C
M='/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dah
d
i
/oct61
2x' clean
make[2]: Entering directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
make[2]: ***
M=/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahd
i
/
oct612
x: No such file or directory. Stop.
make[2]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:179: recipe for target 'clean' failed
make[1]: *** [clean] Error 2
make[1]: Leaving directory
'/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
Makefile:14: recipe for target 'clean' failed
make: *** [clean] Error 2
I fell at the first hurdle. The directory oct612x does exist,
however, and it contains files.
Any thoughts?
-----Original Message-----
From: Steve Zingman [mailto:szingman@msgstor.com]
Sent: 09 January 2016 14:51
To: David Osborn; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
David,
cd /usr/src/astsrc-1.4.23-pre/dahdi-linux-complete
make clean
make all
make install
make config
73, Steve N4IRS
On 01/09/2016 09:46 AM, David Osborn wrote:
Hi all,
I downloaded and installed the DIAL image for the RPi2 and it went
in a treat. Great work guys!
What I did next broke it, but it is something that we all have to
do and I've done it many times with my Acid installs: I did an
update to the system.
Just as with Acid, the updates broke Asterisk and it craps out
after a few
tries:
[Jan 9 14:34:48] WARNING[300] chan_dahdi.c: Unable to open
'/dev/dahdi/pseudo': No such file or directory [Jan 9 14:34:48]
ERROR[300] chan_dahdi.c: Unable to dup channel: No such file or
directory [Jan 9 14:34:48] WARNING[301] chan_simpleusb.c: File
simpleusb_tune_usb.conf not found, device usb using default parameters.
[Jan 9 14:34:50] ERROR[269] app_rpt.c: Continual RPT thread
restarts, killing Asterisk
I am guessing that Asterisk etc needs to be re-compiled. How do I
go about this? I tried running the rpi2 install script at
https://github.com/N4IRS/AllStar and answered "n" to repeated
queries about patches. Compilation appeared to succeed, but
Asterisk still dies on
me.
Thanks again for the work on this. I'm most impressed with the RPI2!
David Osborn
GD4HOZ
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
down to the bottom of the page. Enter your email address and press
the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a
message to the list detailing the problem.
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic