I have an IRLP node and an Allstar node. I’m afraid I’m not very knowledgeable on either.
It seems that in the IRLP world it’s customary (and considered good etiquette) to have a fairly short (like 20 minute) connection timeout timer. No activity from your node within 20 minutes and the connection will drop. I guess they expect if you’re going to dial up a node/reflector that you’re going to be making a contact, not just listening. I’ve read the policy on at least one reflector that says they will ban you for circumventing the connection timeout.
Is this also standard in the Allstar world? I don’t believe my node times out at all. And I tend to favor camping out on various hubs just to listen. But I want to follow whatever the best practice is.
Part of the reason IRLP has that rule is because their nodes perform
nightly node updates that won’t happen while the node is connected.
Generally, Allstar does not have that as a blanket system wide
policy. It is possible that some node owners may have more stringent
polices, but I’ve never run across one yet.
N5ZUA
···
On 6/11/2016 10:56 PM, Elden Fenison
wrote:
I have an IRLP node and an Allstar node. I'm afraid
I’m not very knowledgeable on either.�
It seems that in the IRLP world it's customary (and
considered good etiquette) to have a fairly short (like 20
minute) connection timeout timer. No activity from your node
within 20 minutes and the connection will drop. I guess they
expect if you’re going to dial up a node/reflector that you’re
going to be making a contact, not just listening. I’ve read
the policy on at least one reflector that says they will ban
you for circumventing the connection timeout.�
Is this also standard in the Allstar world? I don't believe
my node times out at all. And I tend to favor camping out on
various hubs just to listen. But I want to follow whatever the
best practice is.
Thanks for your help.
_______________________________________________
App_rpt-users mailing list
To unsubscribe from this list please visit and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
most (not all, but most) allstar ops are more than willing to have nodes interconnected. our network up here between nyc and phl has, at various times, had long-term transient nodes from fl, va, and me…along with connecting to the Lincoln Highway coast-to-coast net a couple years ago.
···
Only ‘mode’ that is of questionable use, to me, due to the utter lack of development since it was released is Echolink; many of us have ‘dummy’ echo nodes that aren’t connected to anything, but catch the bored drive-by Echo surfers without disturbing the allstar link. (my own opinion? Echolink is the 11 Meters of the amateur radio world)
–
Bryan
Sent from my iPhone 6S…No electrons were harmed in the sending of this message.
Part of the reason IRLP has that rule is because their nodes perform
nightly node updates that won’t happen while the node is connected.
Generally, Allstar does not have that as a blanket system wide
policy. It is possible that some node owners may have more stringent
polices, but I’ve never run across one yet.
N5ZUA
On 6/11/2016 10:56 PM, Elden Fenison
wrote:
I have an IRLP node and an Allstar node. I'm afraid
I’m not very knowledgeable on either.
It seems that in the IRLP world it's customary (and
considered good etiquette) to have a fairly short (like 20
minute) connection timeout timer. No activity from your node
within 20 minutes and the connection will drop. I guess they
expect if you’re going to dial up a node/reflector that you’re
going to be making a contact, not just listening. I’ve read
the policy on at least one reflector that says they will ban
you for circumventing the connection timeout.
Is this also standard in the Allstar world? I don't believe
my node times out at all. And I tend to favor camping out on
various hubs just to listen. But I want to follow whatever the
best practice is.
Thanks for your help.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
[http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users)
To unsubscribe from this list please visit [http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.