I don't understand something, and before I file this as a bug report
on Mantis, I want to make sure that it is.
My current setup consists of a DMK URI, and an Icom UHF commercial
radio running simplex. I have this parameter set in usbradio.conf:
duplex=0
If I set duplex=1, it will continually kerchunk. If I set it back to
duplex=0, when the radio receives a signal, it will transmit.
Only by adding this to my node stanza in rpt.conf will it behave as expected:
duplex=1
Either I'm not understanding how this works, or I don't have something
configured or implemented correctly, or it's a bug?
tnx
Stephen
K1LNX
···
--
**********************************
Stephen Brown - ARS K1LNX
Johnson City, TN EM86 http://www.k1lnx.net
google voice: 423-665-9367
**********************************
On Fri, Jul 31, 2009 at 09:05, Stephen - K1LNX<k1lnx@k1lnx.net> wrote:
I don't understand something, and before I file this as a bug report
on Mantis, I want to make sure that it is.
My current setup consists of a DMK URI, and an Icom UHF commercial
radio running simplex. I have this parameter set in usbradio.conf:
duplex=0
If I set duplex=1, it will continually kerchunk. If I set it back to
duplex=0, when the radio receives a signal, it will transmit.
Only by adding this to my node stanza in rpt.conf will it behave as expected:
duplex=1
Either I'm not understanding how this works, or I don't have something
configured or implemented correctly, or it's a bug?
tnx
Stephen
K1LNX
--
**********************************
Stephen Brown - ARS K1LNX
Johnson City, TN EM86 http://www.k1lnx.net
google voice: 423-665-9367
**********************************
_______________________________________________
App_rpt-users mailing list
App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users