I have several issues I’m working on. It’s a PC Dell laptop that I loaded ASL on. It show active on ASL and I can connect EchoLink. When I select menu simpleusb tune menu, Selected item #4 ===> Run simpleusb-tune-menu for SimpleUSB configuration. Does nothing other than to keep telling me… “Simp…

for the node in question… lets see your line in rpt.conf of the channel driver load and your simpleusb.conf

Do you have the device id’d corretly from ‘lsusb’ to your simpleusb_radiotune file ?

No, I’m trying to test the interface I built and needed to solve the two problems first.

No correct id… no see How else would it know how to find it ? lsusb Bus 003 Device 002: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter simpleusb_radiotune devstr=3-2:1.0

Where do I set that up? I’m new at this. As far as I got. Thanks [image]

you need to type lsusb to get a list of the usb devices and locate the c media sound dongle use example above to put that data in file /etc/asterisk/simpleusb_tune_usb_29978.conf it should look like this inside (my node num) [usb_29285] ; devstr=4-2:1.0 rxmixerset=700 txmixaset=300 txmixbse…

Found media But if I type in root /etc/asterisk/simpleusb_tune_usb_29978.conf Permission denied su /etc/asterisk/simpleusb_tune_usb_29978.conf no password entry Sudo /etc/asterisk/simpleusb_tune_usb_29978.conf command not found

sudo nano /etc/asterisk/simpleusb_tune_usb_29978.conf if you are root, you can drop the sudo nano is a file editor, the file is not a executable, but a text file containing configuration settings

By your first picture you don’t have it active. Put a ; in front of DADHI and take the ; out in front of the SIMPLEUSB/USB_29978 then restart Asterisk.

AllStarLink Community Forum

ASL run simpleusb-tune-menu

AllStarLink

K7iou1 March 28, 2022, 10:39pm 3

image1920×1118 232 KB

image1920×1164 210 KB

image1920×1227 212 KB

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled