My problem is that Im geting random port disconnects. Ive checked everything and thought I might be missing something somewhere. The way im setup is Port 1 (Repeater), Port 2 (Allstar Link), Port 3 (IRLP). I link port 1 to Port 2, then I link Port 1 to Port 3.
I think Arcom is aware of the problem, but I do not know the fix or if there is. I sold my arcom and don’t get the emails from the yahoo group anymore. I would post there and see if there is a solution.
I came to the same conclusion as Bob, ditch the Arcom! LOL
My problem is that Im geting random port disconnects. Ive checked everything and thought I might be missing something somewhere. The way im setup is Port 1 (Repeater), Port 2 (Allstar Link), Port 3 (IRLP). I link port 1 to Port 2, then I link Port 1 to Port 3.
I have a RC-210 running a Vertex repeater on port 1 and port 2 is a DMK
URI. The controller is about 4 years old but I flashed the latest
firmware before the install about a month and a half ago.
I don’t have any random disconnect issues.
I suggest you flash the controller to default and upgrade the
firmware. This gives you a known starting place with no scheduler
activities or other things that someone else might have done before you.
Kevin Custer
···
I think Arcom is aware of the problem, but I do not know
the fix or if there is. I sold my arcom and don’t get the emails from
the yahoo group anymore. I would post there and see if there is a
solution.
I came to the same conclusion as Bob, ditch the Arcom! LOL
My problem is that Im geting random port disconnects.
Ive checked everything and thought I might be missing something
somewhere. The way im setup is Port 1 (Repeater), Port 2 (Allstar
Link), Port 3 (IRLP). I link port 1 to Port 2, then I link Port 1 to
Port 3.