Excellent - thanks. BW and hardware won’t be an issue where I think this would go.
Today’s Topics:
- Hub vs Node? (Jim Aspinwall)
- Re: Hub vs Node? (Steve Zingman)
- Re: Hub vs Node? (Kevin Custer)
···
Message: 1
Date: Sun, 14 Feb 2016 22:24:49 +0000 (UTC)
From: Jim Aspinwall no1pc@yahoo.com
To: “app_rpt-users@ohnosec.org” app_rpt-users@ohnosec.org
Subject: [App_rpt-users] Hub vs Node?
Message-ID:
1373181799.4087456.1455488689812.JavaMail.yahoo@mail.yahoo.com
Content-Type: text/plain; charset=“utf-8”
What if anything are the specific differences between a single node (tied to simplex, repeater, Pi box and headset…) that can presumably only accept one in-bound call/connect, and a hub, to which many can connect and bridge through/over?
Given a certain amount of specialization or purpose/interest-built hubs I am interested in having a purpose-built hub for a few systems and users not exclusive but so as not to impose on others’ hubs and traffic.
What does it take to do this?
-------------- next part --------------
An HTML attachment was scrubbed…
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160214/3423844a/attachment-0001.html>
Message: 2
Date: Mon, 15 Feb 2016 09:54:44 -0500
From: Steve Zingman szingman@msgstor.com
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Hub vs Node?
Message-ID: 56C1E6B4.1010300@msgstor.com
Content-Type: text/plain; charset=“windows-1252”; Format=“flowed”
Jim,
Any node can be a “HUB” A node is not limited to one connection. There
may be hardware limitation about the number of connections a given piece
of hardware and internet connection can support. Typically, a HUB is
located on a higher bandwidth internet connection and is running a more
“stout” piece of hardware. A HUB usually does not have a node radio
connected to it, but there is no reason it can’t. A HUB usually runs
DAHDI/pseudo for it’s rxchannel.
As a example HUB 2100 is running on a decent internet connection and
decent hardware. We are running the beta test of the DMR <—> AllStar
gateway on it so it has a NW Digital DV3000 connected and is using
chan_usrp instead of pseudo for it’s rxchannel.
Hope this helps.
73, Steve N4IRS
On 2/14/2016 5:24 PM, Jim Aspinwall wrote:
What if anything are the specific differences between a single node
(tied to simplex, repeater, Pi box and headset…) that can presumably
only accept one in-bound call/connect, and a hub, to which many can
connect and bridge through/over?Given a certain amount of specialization or purpose/interest-built
hubs I am interested in having a purpose-built hub for a few systems
and users not exclusive but so as not to impose on others’ hubs and
traffic.What does it take to do this?
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed…
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160215/13f59dc5/attachment-0001.html>
Message: 3
Date: Mon, 15 Feb 2016 11:04:26 -0500
From: Kevin Custer kuggie@kuggie.com
To: app_rpt-users@ohnosec.org, arm-app_rpt@yahoogroups.com
Subject: Re: [App_rpt-users] Hub vs Node?
Message-ID: 56C1F70A.4070805@kuggie.com
Content-Type: text/plain; charset=“utf-8”; Format=“flowed”
This is now answered in the DIAL FAQ:
http://docs.allstarlink.org/drupal/node/170
Kevin
On 2/15/2016 9:54 AM, Steve Zingman wrote:
Jim,
Any node can be a “HUB” A node is not limited to one connection. There
may be hardware limitation about the number of connections a given
piece of hardware and internet connection can support. Typically, a
HUB is located on a higher bandwidth internet connection and is
running a more “stout” piece of hardware. A HUB usually does not have
a node radio connected to it, but there is no reason it can’t. A HUB
usually runs DAHDI/pseudo for it’s rxchannel.As a example HUB 2100 is running on a decent internet connection and
decent hardware. We are running the beta test of the DMR <—> AllStar
gateway on it so it has a NW Digital DV3000 connected and is using
chan_usrp instead of pseudo for it’s rxchannel.Hope this helps.
73, Steve N4IRS
On 2/14/2016 5:24 PM, Jim Aspinwall wrote:
What if anything are the specific differences between a single node
(tied to simplex, repeater, Pi box and headset…) that can
presumably only accept one in-bound call/connect, and a hub, to which
many can connect and bridge through/over?Given a certain amount of specialization or purpose/interest-built
hubs I am interested in having a purpose-built hub for a few systems
and users not exclusive but so as not to impose on others’ hubs and
traffic.What does it take to do this?
-------------- next part --------------
An HTML attachment was scrubbed…
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160215/c10bff2a/attachment-0001.html>
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
End of App_rpt-users Digest, Vol 84, Issue 17