[App_rpt] Hot TX audio

AllStarLink
1

Hi all,

Just fishing for ideas... I have my app_rpt node connected to a radio right now via the mic input, and the audio is HOT. Using the 'radio tune txvoice' command, I get no audioble ouput when using a number below 27, but anything over 50 or so drives the radio way way wide in deviation and starts clipping.

I'm assuming that the parameter here is adjusting the volume on the USB sound fob, and it's just too much for the rig... Thinking a resistor in the TX audio line would do it, any suggested for a size? :slight_smile: Then I can run over to Radio Shack and pay them $3.95 for an $0.18 resistor. LoL

Steve

2

a resistor or 2 is always good for that, since it also makes for better decoupling
and thats good when you have such a sensitive input.

···

From: n9yty@n9yty.com
To: app_rpt@lists.illiana.net
Date: Mon, 14 Jul 2008 15:07:24 -0500
Subject: [App_rpt] Hot TX audio

Hi all,

Just fishing for ideas… I have my app_rpt node connected to a radio
right now via the mic input, and the audio is HOT. Using the ‘radio
tune txvoice’ command, I get no audioble ouput when using a number
below 27, but anything over 50 or so drives the radio way way wide in
deviation and starts clipping.

I’m assuming that the parameter here is adjusting the volume on the
USB sound fob, and it’s just too much for the rig… Thinking a
resistor in the TX audio line would do it, any suggested for a
size? :slight_smile: Then I can run over to Radio Shack and pay them $3.95 for an
$0.18 resistor. LoL

Steve

App_rpt mailing list
App_rpt@lists.illiana.net
http://lists.illiana.net/mailman/listinfo/app_rpt