40 channel remote base GM300!

App_rpt-users
1

I managed to steer to any of the 40 GM300 channels with AllStar link and custom scripts. I am going to deploy this 40 channel VHF remote and a 20 channel UHF on a mountaintop with a wireless internet service provider.

Binary select only lets me get to 16 channels, so my method controls the front panel directly.

It’s been a pretty fun project, but it has been a pain messing with the event handler in Allstar to get everything to work properly. Due to limitations, I had to set up the base as a standard node and write customizations for user log in to enable the transmitter.

Here is the video

https://youtu.be/ZY9pfy5F4hw

73

Skyler KDØWHB

2

Skyler, very well done.

tnx
Mike / W5JR

Alpharetta GA

···

On Jun 22, 2016, at 12:03 PM, Skyler Fennell electricity440@gmail.com wrote:

I managed to steer to any of the 40 GM300 channels with AllStar link and custom scripts. I am going to deploy this 40 channel VHF remote and a 20 channel UHF on a mountaintop with a wireless internet service provider.

Binary select only lets me get to 16 channels, so my method controls the front panel directly.

It’s been a pretty fun project, but it has been a pain messing with the event handler in Allstar to get everything to work properly. Due to limitations, I had to set up the base as a standard node and write customizations for user log in to enable the transmitter.

Here is the video

https://youtu.be/ZY9pfy5F4hw

73

Skyler KDØWHB

App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.