# Zap Autopatch

**URL:** <https://community.allstarlink.org/t/zap-autopatch/7954>\
**Category:** AllStarLink\
**Created:** [August 29, 2009, 10:32pm UTC](https://community.allstarlink.org/t/zap-autopatch/7954 "2009-08-29T22:32:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tim\_Sawyer](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/t/bc79bd/32.png) [@Tim\_Sawyer](https://community.allstarlink.org/u/Tim_Sawyer)\
**Post date:** [August 29, 2009, 10:32pm UTC](https://community.allstarlink.org/t/zap-autopatch/7954/1 "2009-08-29T22:32:11Z")

</div>

Well, I was hoping I could figure this out but no luck yet. I'm attempting to get out bound calls working. The TDM410 card is working thanks to Jim. I'm getting dial tone twice, once after \*6 and once after entering the phone number. But I don't hear DTMF dialing.

I really haven't changed much except extensions.conf as follows:

[default]  
; exten =\> \_1NXXNXXXXXX,1,Dial(IAX2/${VOIPTERM}/${EXTEN},40,L(180000:30000))  
exten =\> \_1NXXNXXXXXX,1,Dial(Zap/1,20/${EXTEN})  
exten =\> \_1NXXNXXXXXX,2,Hangup

Obviously that's not the entire answer... if even the partial answer.

Thanks to the list once again,

> **···**
>
> --  
> Tim  
> :wq

---

<div class="post-metadata">

**Author:** ![Sales1](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/s/ed655f/32.png) [@Sales1](https://community.allstarlink.org/u/Sales1)\
**Post date:** [August 29, 2009, 11:33pm UTC](https://community.allstarlink.org/t/zap-autopatch/7954/2 "2009-08-29T23:33:04Z")

</div>

Tim Sawyer wrote:

> Well, I was hoping I could figure this out but no luck yet. I'm  
> attempting to get out bound calls working. The TDM410 card is working  
> thanks to Jim. I'm getting dial tone twice, once after \*6 and once  
> after entering the phone number. But I don't hear DTMF dialing.
> 
> I really haven't changed much except extensions.conf as follows:
> 
> [default]  
> ; exten =\> \_1NXXNXXXXXX,1,Dial(IAX2/${VOIPTERM}/${EXTEN},  
> 40,L(180000:30000))  
> exten =\> \_1NXXNXXXXXX,1,Dial(Zap/1,20/${EXTEN})  
> exten =\> \_1NXXNXXXXXX,2,Hangup
> 
> Obviously that's not the entire answer... if even the partial answer.
> 
> Thanks to the list once again,  
> --  
> Tim  
> :wq
> 
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> App\_rpt-users mailing list  
> App\_rpt-users@qrvc.com  
> [http://qrvc.com/mailman/listinfo/app\_rpt-users](http://qrvc.com/mailman/listinfo/app_rpt-users)

The problem is most likely this:

Dial(Zap/1,20/${EXTEN})

It should probably look like this:

Dial(Zap/1/${EXTEN})

See [Asterisk cmd Dial - VoIP-Info](http://www.voip-info.org/wiki/view/Asterisk+cmd+Dial)

for further details.

Steve  
WA6ZFT
