# Your VOTER/RTCM May Have Broken Itself on 01/01/21 00:01 **URL:** \ **Category:** AllStarLink\ **Created:** [January 4, 2021, 6:44am UTC](https://community.allstarlink.org/t/your-voter-rtcm-may-have-broken-itself-on-01-01-21-00-01/18031 "2021-01-04T06:44:47Z")\ **Posts on this page:** 1\ **Showing post:** 18
**Author:** ![Chuck\_Henderson](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/c/ba9def/32.png) [@Chuck\_Henderson](https://community.allstarlink.org/u/Chuck_Henderson)\ **Post date:** [January 7, 2021, 10:03pm UTC](https://community.allstarlink.org/t/your-voter-rtcm-may-have-broken-itself-on-01-01-21-00-01/18031/18 "2021-01-07T22:03:51Z")
v3.30 Chuck > **···** > > On Tue, Jan 5, 2021 at 8:29 PM Lee via AllStarLink Discussion Groups \<[noreply@community.allstarlink.org](mailto:noreply@community.allstarlink.org)\> wrote: > > > > ![](https://community.allstarlink.org/user_avatar/community.allstarlink.org/ve7fet/45/1267_2.png "ve7fet") | [ve7fet](https://community.allstarlink.org/u/ve7fet) > > > January 6 | > > > > > > - | - | > > > > Hi Chuck, > > > > Yes, I have MPLAB running in “Windows XP Mode” (virtual machine) on my (broken) Windows 7 laptop. The nice thing about it is that it lets you map a shared folder to the host (Windows 7), so it is easy to get files in and out of the build environment. > > > > I am wondering if you can tell me what version of the compiler (MPLAB C Compiler) you are running is (probably in Help/About in MPLAB)? > > > > I am trying to restore my compiler environment, to confirm indeed that I was using the latest released version of the compiler (v3.31). > > > > Lee > > > > * * * > > > > [Visit Topic](https://community.allstarlink.org/t/your-voter-rtcm-may-have-broken-itself-on-01-01-21-00-01/18031/16) or reply to this email to respond. > > > > * * * > > > > #### Previous Replies > > > > > ![](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/w/b9bd4f/45.png "W8khw1") | [W8khw1](https://community.allstarlink.org/u/w8khw1) > > > January 6 | > > > > > > - | - | > > > > I just finished testing with a Garmin !8 GPS. Still not setting the time correctly. > > > > Enter Selection (1-27,97-99,r,q,d) : 98 > > S/W Version: 1.54 04/14/2020 > > System Uptime: 982.2 Secs > > IP Address: 192.168.1.10 > > Netmask: 255.255.255.0 > > Gateway: 192.168.1.1 > > Primary DNS: 192.168.1.1 > > Secondary DNS: 0.0.0.0 > > DHCP: 1 > > VOTER Server IP: 0.0.0.0 > > VOTER Server UDP Port: 667 > > OUR UDP Port: 667 > > GPS Lock: 0 > > Connected: 0 > > COR: 1 > > EXT CTCSS IN: 1 > > PTT: 0 > > RSSI: 0 > > Current Samples / Sec.: 0 > > Current Peak Audio Level: 24 > > Squelch Noise Gain Value: 35, Diode Cal. Value: 41, SQL pot 179 > > Last Rx Pkt System time: , diff: 0 msec > > Last Rx Pkt Timestamp time: , diff: 0 msec > > Last Rx Pkt index: 0, inbounds: 0 > > > > Press The Any Key (Enter) To Continue > > GPS signal lost entirely. Starting again… > > GPS Receiver Active, waiting for aquisition > > GPS signal acquired, number of satellites in use = 4 > > Time now syncronized to GPS > > > > ··· [(click for more details)](https://community.allstarlink.org/t/your-voter-rtcm-may-have-broken-itself-on-01-01-21-00-01/18031/15) > > > > > ![](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/g/9de0a6/45.png "Gregn1") | [Gregn1](https://community.allstarlink.org/u/gregn1) > > > January 6 | > > > > > > - | - | > > > > I got the same results as WB6OZD. I’m also using a BG7BTL GPS receiver and using the 1.54 voter board version. > > > > Greg > > WB6ZSU > > > > > ![](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/w/977dab/45.png "WB6OZD") | [WB6OZD](https://community.allstarlink.org/u/wb6ozd) > > > January 5 | > > > > > > - | - | > > > > No go for me on the update as well. Tried all settings of option 12 (0,1,2,3,4) and get varying “Current Time” showing: > > 0 - 01/01/1970, time is value from power up > > 1 - 10/06/1988, 02:43:43 > > 2 - 08/17/1989, time is value from power up > > 3 - 05/22/2008, 02:43:43 > > 4 - 08/02/2009, time is value from power up > > (note that current time was about UTC 23:28 when testing). > > > > I’m currently testing with a newer BG7TBL unit, but I have a Garmin I can give a go on as well. > > > > Here’s my status output: > > S/W Version: 1.54 04/14/2020 > > System Uptime: 76.7 Secs > > IP Address: 192.168.1.51 > > Netmask: 255.255.255.0 > > Gateway: 192.168.1.1 > > Primary DNS: 192.168.1.22 > > Secondary DNS: 1.1.1.1 > > DHCP: 1 > > VOTER Server IP: 192.5.222.90 > > VOTER Server UDP Port: 667 > > OUR UDP Port: 667 > > GPS Lock: 1 > > Connected: 1 > > COR: 0 > > EXT CTCSS IN: 1 > > PTT: 0 > > RSSI: 0 > > Current Samples / Sec.: 8000 > > Current Peak Audio Level: 53144 > > Squelch Noise Gain Value: 24, Diode Cal. Value: 44, SQL pot 559 > > Current Time: Thu Apr 02, 2009 00:01:09.300 > > Last Rx Pkt System time: , diff: 1679888052 msec > > Last Rx Pkt Timestamp time: , diff: 0 msec > > Last Rx Pkt index: 0, inbounds: 0 > > > > > ![](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/w/b9bd4f/45.png "W8khw1") | [W8khw1](https://community.allstarlink.org/u/w8khw1) > > > January 5 | > > > > > > - | - | > > > > Thank you for uploading the binary files Chuck! Unfortunately I still have no glory on setting the time, but I am still testing with the QRP Labs GPS module which might be the problem. I am sure that I have some Garmin 18 puck GPS modules around here as well as a Thunderbolt running downstairs. I will give them a try later this evening. > > > > Kevin, W8KHW > > > > My Status output: > > > > GPS signal acquired, number of satellites in use = 3 > > Warning: GPS Data time period elapsed > > Warning: GPS PPS Signal time period elapsed > > Time now syncronized to GPS > > > > Enter Selection (1-27,97-99,r,q,d) : 98 > > S/W Version: 1.54 04/14/2020 > > System Uptime: 73.3 Secs > > IP Address: 172.25.36.189 > > Netmask: 255.255.255.0 > > Gateway: 172.25.36.1 > > Primary DNS: 172.25.36.107 > > Secondary DNS: 172.25.34.108 > > DHCP: 0 > > VOTER Server IP: 172.25.36.89 > > VOTER Server UDP Port: 667 > > OUR UDP Port: 667 > > GPS Lock: 1 > > Connected: 0 > > COR: 1 > > EXT CTCSS IN: 1 > > PTT: 0 > > RSSI: 0 > > Current Samples / Sec.: 8000 > > Current Peak Audio Level: 40 > > Squelch Noise Gain Value: 20, Diode Cal. Value: 50, SQL pot 265 > > Last Rx Pkt System time: , diff: 0 msec > > Last Rx Pkt Timestamp time: , diff: 0 msec > > Last Rx Pkt index: 0, inbounds: 0 > > > > ··· [(click for more details)](https://community.allstarlink.org/t/your-voter-rtcm-may-have-broken-itself-on-01-01-21-00-01/18031/12) > > > > > ![](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/c/ba9def/45.png "Chuck\_Henderson") | [Chuck\_Henderson](https://community.allstarlink.org/u/chuck_henderson) > > > January 5 | > > > > > > - | - | > > > > I just now uploaded the 2 binary files that I use here. > > [https://github.com/ccie2285/voter/tree/master/board-firmware](https://github.com/ccie2285/voter/tree/master/board-firmware) > > > > they are > > Voter154SMT04-14-20c.cry S/W Version: 1.54 04/14/2020 “CHUCK” for RTCM > > > > and > > Voter154voter-04-14-20c.cry S/W Version: 1.54 04/14/2020 “CHUCK” for Voter Board > > > > I am using the compiler that I have been using since the beginning back in about 2010 that is running on Windows XP service pack 2 (offline) > > It is a pain to get files onto and off of without a network, but I can slowly transfer via USB 2 thumb drives. > > > > I only compile versions that I have hardware to test. Both of these files have been running without problems since 4-14-2020, the day I compiled them. > > don’t forget to set offline #12 to one of 0, 1, 2, 3, or 4 and save and reboot > > Chuck > > > > ··· [(click for more details)](https://community.allstarlink.org/t/your-voter-rtcm-may-have-broken-itself-on-01-01-21-00-01/18031/11) > > > > * * * > > > > [Visit Topic](https://community.allstarlink.org/t/your-voter-rtcm-may-have-broken-itself-on-01-01-21-00-01/18031/16) or reply to this email to respond. > > > > You are receiving this because you enabled mailing list mode. > > > > To unsubscribe from these emails, [click here](https://community.allstarlink.org/email/unsubscribe/88135e57e99663e07acb95fda47e772dde49a7e138908107d5be45b226c9deef). --- _[View the full topic](https://community.allstarlink.org/t/your-voter-rtcm-may-have-broken-itself-on-01-01-21-00-01/18031)._