I just finished testing with a Garmin !8 GPS. Still not setting the time correctly.
Enter Selection (1-27,97-99,r,q,d) : 98
S/W Version: 1.54 04/14/2020
System Uptime: 982.2 Secs
IP Address: 192.168.1.10
Netmask: 255.255.255.0
Gateway: 192.168.1.1
Primary DNS: 192.168.1.1
Secondary DNS: 0.0.0.0
DHCP: 1
VOTER Server IP: 0.0.0.0
VOTER Server UDP Port: 667
OUR UDP Port: 667
GPS Lock: 0
Connected: 0
COR: 1
EXT CTCSS IN: 1
PTT: 0
RSSI: 0
Current Samples / Sec.: 0
Current Peak Audio Level: 24
Squelch Noise Gain Value: 35, Diode Cal. Value: 41, SQL pot 179
Last Rx Pkt System time: , diff: 0 msec
Last Rx Pkt Timestamp time: , diff: 0 msec
Last Rx Pkt index: 0, inbounds: 0
Press The Any Key (Enter) To Continue
GPS signal lost entirely. Starting again…
GPS Receiver Active, waiting for aquisition
GPS signal acquired, number of satellites in use = 4
Time now syncronized to GPS
···
On Tue, Jan 5, 2021 at 7:03 PM Jon Welfringer via AllStarLink Discussion Groups <noreply@community.allstarlink.org> wrote:
| WB6OZD
January 5 |
- | - |
No go for me on the update as well. Tried all settings of option 12 (0,1,2,3,4) and get varying “Current Time” showing:
0 - 01/01/1970, time is value from power up
1 - 10/06/1988, 02:43:43
2 - 08/17/1989, time is value from power up
3 - 05/22/2008, 02:43:43
4 - 08/02/2009, time is value from power up
(note that current time was about UTC 23:28 when testing).I’m currently testing with a newer BG7TBL unit, but I have a Garmin I can give a go on as well.
Here’s my status output:
S/W Version: 1.54 04/14/2020
System Uptime: 76.7 Secs
IP Address: 192.168.1.51
Netmask: 255.255.255.0
Gateway: 192.168.1.1
Primary DNS: 192.168.1.22
Secondary DNS: 1.1.1.1
DHCP: 1
VOTER Server IP: 192.5.222.90
VOTER Server UDP Port: 667
OUR UDP Port: 667
GPS Lock: 1
Connected: 1
COR: 0
EXT CTCSS IN: 1
PTT: 0
RSSI: 0
Current Samples / Sec.: 8000
Current Peak Audio Level: 53144
Squelch Noise Gain Value: 24, Diode Cal. Value: 44, SQL pot 559
Current Time: Thu Apr 02, 2009 00:01:09.300
Last Rx Pkt System time: , diff: 1679888052 msec
Last Rx Pkt Timestamp time: , diff: 0 msec
Last Rx Pkt index: 0, inbounds: 0
Visit Topic or reply to this email to respond.
You are receiving this because you enabled mailing list mode.
To unsubscribe from these emails, click here.