# Yaesu FTM Series radios

**URL:** <https://community.allstarlink.org/t/yaesu-ftm-series-radios/22113>\
**Category:** Archive\
**Created:** [October 22, 2024, 9:28pm UTC](https://community.allstarlink.org/t/yaesu-ftm-series-radios/22113 "2024-10-22T21:28:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![N3NKV1](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n3nkv1/32/2097_2.png) [@N3NKV1](https://community.allstarlink.org/u/N3NKV1)\
**Post date:** [October 22, 2024, 9:28pm UTC](https://community.allstarlink.org/t/yaesu-ftm-series-radios/22113/1 "2024-10-22T21:28:15Z")

</div>

Has anyone on her set up an Allstar note using one of the the Yaesu FTM series of 2 mobiles and what was your interface setup?

---

<div class="post-metadata">

**Author:** ![N2DYI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n2dyi/32/1712_2.png) [@N2DYI](https://community.allstarlink.org/u/N2DYI)\
**Post date:** [October 23, 2024, 12:38am UTC](https://community.allstarlink.org/t/yaesu-ftm-series-radios/22113/2 "2024-10-23T00:38:42Z")

</div>

I haven’t done this personally, but was working with someone a couple of years back who used an FT-M100 coupled with a DINAH. There was a setting that needed to be changed in the radio regarding the squelch logic of the data port, and I think the cable this person had didn’t tap from the discriminator, but that might just be a simple pin change. Not familiar enough with that radio to say.  
With my Kenwood TM-V71A and TM-D700A, for example, I can tap from pin 5 instead of pin 4 on the 6-pin DIN in order to pick up the discriminator of the radio, which sounds much better than the filtered AF stage, even with a high pass filter applied in simpleusb or usbradio.