# Why not dvswitch AllStar 3

**URL:** <https://community.allstarlink.org/t/why-not-dvswitch-allstar-3/21857>\
**Category:** Archive\
**Tags:** asl3\
**Created:** [September 11, 2024, 9:33am UTC](https://community.allstarlink.org/t/why-not-dvswitch-allstar-3/21857 "2024-09-11T09:33:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![loui](https://community.allstarlink.org/user_avatar/community.allstarlink.org/loui/32/4817_2.png) [@loui](https://community.allstarlink.org/u/loui)\
**Post date:** [September 11, 2024, 9:33am UTC](https://community.allstarlink.org/t/why-not-dvswitch-allstar-3/21857/1 "2024-09-11T09:33:30Z")

</div>

Allstar 2 had dvswitch on board, AllStar 3 apparently does not. Here you have to fill in the data yourself, also Echolink. Is this done on purpose or is version 3 a completely different design?

---

<div class="post-metadata">

**Author:** ![Mike](https://community.allstarlink.org/user_avatar/community.allstarlink.org/mike/32/1569_2.png) [@Mike](https://community.allstarlink.org/u/Mike)\
**Post date:** [September 11, 2024, 1:50pm UTC](https://community.allstarlink.org/t/why-not-dvswitch-allstar-3/21857/2 "2024-09-11T13:50:44Z")

</div>

To the best of my knowledge, DVSwitch was never included with any ASL release.

You must be speaking to someones else’s pi image release or install script.  
And I am not aware of it.

But you might query @ [dvswitch.groups.io](http://dvswitch.groups.io)

They may have had a install script that did it all for you ?

Echolink has been included for the last 5 versions. You do have to fill in your info.  
Not everyone uses it, so you do have to enable it in modules.conf
