# Using URI for HF Digital modes (FT8, JT65 etc.) with Kenwood TS 2000

**URL:** <https://community.allstarlink.org/t/using-uri-for-hf-digital-modes-ft8-jt65-etc-with-kenwood-ts-2000/15614>\
**Category:** AllStarLink\
**Created:** [October 16, 2019, 4:00pm UTC](https://community.allstarlink.org/t/using-uri-for-hf-digital-modes-ft8-jt65-etc-with-kenwood-ts-2000/15614 "2019-10-16T16:00:46Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![tloftus99](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/t/958977/32.png) [@tloftus99](https://community.allstarlink.org/u/tloftus99)\
**Post date:** [October 16, 2019, 4:00pm UTC](https://community.allstarlink.org/t/using-uri-for-hf-digital-modes-ft8-jt65-etc-with-kenwood-ts-2000/15614/1 "2019-10-16T16:00:46Z")

</div>

Hi,

John Colleary over at DMK suggested that I post here to get possible feedback on the use of the URI to interface between a Kenwood TS 2000 and a Windows PC for HF digital modes. Has anyone done this? I tried to hook up via the ACC2 port on the TS 2000 and the URI. I am not having any luck so far. Does anyone have any ideas on what to look for? Troubleshooting? Any thoughts/help is appreciated.

Tom  
AC9CO