# usbradio.conf sample file for IRLP boards **URL:** \ **Category:** AllStarLink\ **Created:** [November 1, 2010, 4:10am UTC](https://community.allstarlink.org/t/usbradio-conf-sample-file-for-irlp-boards/8499 "2010-11-01T04:10:01Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Yokshs1](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/y/7ba0ec/32.png) [@Yokshs1](https://community.allstarlink.org/u/Yokshs1)\ **Post date:** [November 1, 2010, 4:10am UTC](https://community.allstarlink.org/t/usbradio-conf-sample-file-for-irlp-boards/8499/1 "2010-11-01T04:10:01Z")
Hi all, I thought I’d pass along a working usbradio.conf for anyone trying to get an IRLP board going on Asterisk. Consider this file to be a template to get started with. I haven’t managed to get the AUX 1,2,3 outputs going yet, but PTT and COS seem to be working FB. My node radios have built-in PL squelch, which I’m using at the moment. I’m also using the software DTMF decoder. At this point, I’m using an unmodified CM108 fob and my homebrew IRLP board. 1. Kyle K0KN ; ; Usbradio channel driver Configuration File ; [general] [usb2210] ; IRLP board support pp3 = ptt ; out0, out1 or ptt ; pp10 = in ; in, cor or ctcss ; pp12 = in ; pins 10,12,13,15 are for DTMF ; pp13 = in ; pp15 = in pp11 = cor ; pp4 = out0 ; pins 4,5,6 are AUX 1,2,3, default off ; pp5 = out0 ; pp6 = out0 hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=100.0 rxctcssfreqs=100.0 txctcssfreqs=100.0 rxctcssoverride=0 ;carrierfrom=dsp carrierfrom=ppinvert ;ctcssfrom=dsp ;ctcssfrom=pp rxdemod=flat txprelim=yes txlimonly=no txtoctype=notone txmixa=composite txmixb=no invertptt=0 duplex=0 rxondelay=0 rxnoisefiltype=0 eeprom=0 #includeifexists custom/usbradio.conf ---
**Author:** ![Chuck\_Henderson](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/c/ba9def/32.png) [@Chuck\_Henderson](https://community.allstarlink.org/u/Chuck_Henderson)\ **Post date:** [November 1, 2010, 4:26am UTC](https://community.allstarlink.org/t/usbradio-conf-sample-file-for-irlp-boards/8499/2 "2010-11-01T04:26:46Z")
It looks fine here. no garbled characters. > **···** > > On Sun, Oct 31, 2010 at 11:10 PM, K&R Yoksh [yokshs@sbcglobal.net](mailto:yokshs@sbcglobal.net) wrote: > > > Hi all, > > > > I thought I’d pass along a working usbradio.conf for anyone trying to get an IRLP board going on Asterisk. Consider this file to be a template to get started with. I haven’t managed to get the AUX 1,2,3 outputs going yet, but PTT and COS seem to be working FB. > > > > My node radios have built-in PL squelch, which I’m using at the moment. I’m also using the software DTMF decoder. > > > > At this point, I’m using an unmodified CM108 fob and my homebrew IRLP > > board. > > > > 1. > > > > Kyle > > K0KN > > > > ; > > ; Usbradio channel driver Configuration File > > ; > > > > [general] > > > > [usb2210] > > > > ; IRLP board support > > pp3 = ptt ; out0, out1 or ptt > > ; pp10 = in ; in, cor or ctcss > > > > ; pp12 = > > in ; pins 10,12,13,15 are for DTMF > > ; pp13 = in > > ; pp15 = in > > pp11 = cor > > ; pp4 = out0 ; pins 4,5,6 are AUX 1,2,3, default off > > ; pp5 = out0 > > ; pp6 = out0 > > > > hdwtype=0 > > > > rxboost=1 > > txboost=1 > > rxctcssrelax=1 > > txctcssdefault=100.0 > > rxctcssfreqs=100.0 > > txctcssfreqs=100.0 > > rxctcssoverride=0 > > ;carrierfrom=dsp > > carrierfrom=ppinvert > > ;ctcssfrom=dsp > > ;ctcssfrom=pp > > rxdemod=flat > > > > txprelim=yes > > txlimonly=no > > txtoctype=notone > > txmixa=composite > > txmixb=no > > invertptt=0 > > duplex=0 > > rxondelay=0 > > rxnoisefiltype=0 > > eeprom=0 > > > > #includeifexists custom/usbradio.conf > > > * * * > > > > App\_rpt-users mailing list > > > > [App\_rpt-users@qrvc.com](mailto:App_rpt-users@qrvc.com) > > > > [http://qrvc.com/mailman/listinfo/app\_rpt-users](http://qrvc.com/mailman/listinfo/app_rpt-users) ---
**Author:** ![N7pkt](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/n/3ec8ea/32.png) [@N7pkt](https://community.allstarlink.org/u/N7pkt)\ **Post date:** [November 1, 2010, 4:31am UTC](https://community.allstarlink.org/t/usbradio-conf-sample-file-for-irlp-boards/8499/3 "2010-11-01T04:31:39Z")
We are no longer allowed to have IRLP on AllStarLink systems. Jim removed all support for IRLP at Dave Cameron's request.   8-Dale > **···** > > On Sunday, October 31, 2010 09:10:01 pm K&R Yoksh wrote: > > > Hi all, > > > > I thought I'd pass along a working usbradio.conf for anyone trying to get > > an IRLP board going on Asterisk. Consider this file to be a template to > > get started with. I haven't managed to get the AUX 1,2,3 outputs going > > yet, but PTT and COS seem to be working FB. > > -- > Open your mind, Read, Learn, Think, Apply. > AllStar Node 2392 / EchoLink node 541558 / 73, from N7PKT! > [http://www.hybotics.com](http://www.hybotics.com) - NEW main site > Just because we can, does it follow that we should? ---
**Author:** ![Telesistant](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/t/a87d85/32.png) [@Telesistant](https://community.allstarlink.org/u/Telesistant)\ **Post date:** [November 1, 2010, 4:40am UTC](https://community.allstarlink.org/t/usbradio-conf-sample-file-for-irlp-boards/8499/4 "2010-11-01T04:40:14Z")
yes, Dale, I believe they understand this. They are proposing the use of existing IRLP hardware on an Asterisk node, having nothing to do with the IRLP network. JIM > **···** > > > From: [n7pkt@hybotics.org](mailto:n7pkt@hybotics.org) > > To: [app\_rpt-users@qrvc.com](mailto:app_rpt-users@qrvc.com) > > Date: Sun, 31 Oct 2010 21:31:39 -0700 > > Subject: Re: [App\_rpt-users] usbradio.conf sample file for IRLP boards > > > > On Sunday, October 31, 2010 09:10:01 pm K&R Yoksh wrote: > > > > > Hi all, > > > > > > I thought I’d pass along a working usbradio.conf for anyone trying to get > > > an IRLP board going on Asterisk. Consider this file to be a template to > > > get started with. I haven’t managed to get the AUX 1,2,3 outputs going > > > yet, but PTT and COS seem to be working FB. > > > > We are no longer allowed to have IRLP on AllStarLink systems. Jim > > removed all support for IRLP at Dave Cameron’s request. > > > > 8-Dale > > > > – > > Open your mind, Read, Learn, Think, Apply. > > AllStar Node 2392 / EchoLink node 541558 / 73, from N7PKT! > > [http://www.hybotics.com](http://www.hybotics.com) - NEW main site > > Just because we can, does it follow that we should? > > > > * * * > > > > App\_rpt-users mailing list > > [App\_rpt-users@qrvc.com](mailto:App_rpt-users@qrvc.com) > > [http://qrvc.com/mailman/listinfo/app\_rpt-users](http://qrvc.com/mailman/listinfo/app_rpt-users) ---
**Author:** ![KB3CXQ](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/d26b3c/32.png) [@KB3CXQ](https://community.allstarlink.org/u/KB3CXQ)\ **Post date:** [October 22, 2021, 12:44am UTC](https://community.allstarlink.org/t/usbradio-conf-sample-file-for-irlp-boards/8499/5 "2021-10-22T00:44:21Z")
I’m getting the error - “There was an error running option 3” when trying to run the radio-tune menu. Any thoughts? ---
**Author:** ![WD6AWP](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wd6awp/32/5_2.png) [@WD6AWP](https://community.allstarlink.org/u/WD6AWP)\ **Post date:** [October 22, 2021, 7:02pm UTC](https://community.allstarlink.org/t/usbradio-conf-sample-file-for-irlp-boards/8499/6 "2021-10-22T19:02:53Z")
Hello @KB3CXQ, Are you attempting to use usbradio with an IRLP board? That’s not going to work. You’ll need one of the usb attached C-Media sound dongles such as the URI or RA-35. Does that help? BTW, you dug up an 11 year old thread. Whatever you may have read there is probably obsolete. ---
**Author:** ![KB3CXQ](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/d26b3c/32.png) [@KB3CXQ](https://community.allstarlink.org/u/KB3CXQ)\ **Post date:** [October 22, 2021, 8:37pm UTC](https://community.allstarlink.org/t/usbradio-conf-sample-file-for-irlp-boards/8499/7 "2021-10-22T20:37:43Z")
Yes I was trying to see if I can add code to the conf files to use the IRLP board without having to buy anything else i norder to use Allstar