# Two Node system not working

**URL:** https://community.allstarlink.org/t/two-node-system-not-working/19178
**Category:** Archive
**Created:** [February 6, 2022, 3:08am UTC](https://community.allstarlink.org/t/two-node-system-not-working/19178 "2022-02-06T03:08:52Z")
**Posts on this page:** 1
**Showing post:** 32

<div class="post-metadata">

### Author: ![Mike](https://community.allstarlink.org/user_avatar/community.allstarlink.org/mike/32/1569_2.png) [@Mike](https://community.allstarlink.org/u/Mike)
#### Post date: [February 8, 2022, 4:50pm UTC](https://community.allstarlink.org/t/two-node-system-not-working/19178/32 "2022-02-08T16:50:22Z")

</div>

> [@ASL 2.0.0-beta Released](https://community.allstarlink.org/t/asl-2-0-0-beta-released/18236):
>
> We’re looking for beta testers for our newly released ASL 2.0.0-beta images! This distribution has been updated to Debian 10 (buster) to allow users to use the latest apt packages, kernels, and boots on a Raspberry Pi 2, 3, or 4. The core Asterisk AllStarLink version remains at 1.01. Download from: [Downloads - AllStarLink Wiki](https://wiki.allstarlink.org/wiki/Downloads) Report issues/bugs at: [Issues · AllStarLinkInc/ASL-Live-Build · GitHub](https://github.com/AllStarLinkInc/ASL-Live-Build/issues) How to flash the image to a USB: [https://wiki.allstarlink.org/wiki/Beginners\_Guide#Flashing\_th…](https://wiki.allstarlink.org/wiki/Beginners_Guide#Flashing_the_ASL_image)

This modules.conf may help in cases where the beta won’t run.  
[https://raw.githubusercontent.com/AllStarLinkInc/ASL-Live-Build/master/config/includes.chroot/etc/asterisk.asl/modules.conf](https://raw.githubusercontent.com/AllStarLinkInc/ASL-Live-Build/master/config/includes.chroot/etc/asterisk.asl/modules.conf)

This is the modules.conf from ASL 1.01 with one minor but critical modification:

`load => res_smdi.so ; Simplified Message Desk Interface (SMDI)`

I would avoid loading modules you do not need until you need them.  
Stick with the basics until you have it running.  
You should be able to take the one in the link and only adjust simpleusb/usbradio

---

_[View the full topic](https://community.allstarlink.org/t/two-node-system-not-working/19178)._