# SIP -Cisco303 & No Caller ID **URL:** \ **Category:** AllStarLink\ **Created:** [July 20, 2019, 10:29pm UTC](https://community.allstarlink.org/t/sip-cisco303-no-caller-id/15198 "2019-07-20T22:29:58Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![n4crg](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/n/71e660/32.png) [@n4crg](https://community.allstarlink.org/u/n4crg)\ **Post date:** [July 20, 2019, 10:29pm UTC](https://community.allstarlink.org/t/sip-cisco303-no-caller-id/15198/1 "2019-07-20T22:29:58Z")
Allstar Team, Hello, I want to be able and display my call or similar node info in allmon or supermon, notice the screen shot below highlighted in yellow. It says " NO-CID" I’m using a Cisco 303 to dial into my node, admins from reflectors and networks are asking me all the time to get this fixed because it does not identify me or my node. ![image](https://community.allstarlink.org/uploads/default/original/1X/ab599a76da80a3fa48747c409b4abb5b1a9d0703.png) Here is my SIP.conf info : [lineone] type=friend host=dynamic username=500540 secret=passwordone dtmfmode=rfc2833 mailbox=500540 ; Mailbox for message waiting indicator context=sip-phones callerid=N4crg \<500540\> and Extension info : [sip-phones] ; Allow SIP calls to local nodes exten =\> 500540,1,rpt(${EXTEN}|P) exten =\> 1999,1,rpt(1999|P) Thanks, Andy - N4CRG -48671 -49637 -500540 ---
**Author:** ![WD6AWP](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wd6awp/32/5_2.png) [@WD6AWP](https://community.allstarlink.org/u/WD6AWP)\ **Post date:** [July 21, 2019, 3:05am UTC](https://community.allstarlink.org/t/sip-cisco303-no-caller-id/15198/2 "2019-07-21T03:05:53Z")
I’m not familiar with the CISCI 303 but Allmon2 shows the caller ID set by the Zipper setup. ![46%20PM](https://community.allstarlink.org/uploads/default/original/1X/81d0085bae39d620bb4929c6834c6b5e362a39cf.png) My Zopier is set up as noted in this post, Notice how I set caller ID. > [@Zoiper Setup for AllStar](https://community.allstarlink.org/t/zoiper-setup-for-allstar/14893): > > Zoiper is an iOS and Android VoIP telephone app that can be used with AllStar. AllStar Node Settings The Zoiper configuration below allows connections to any node on your AllStar server. In /etc/asterisk/custom/iax.conf add the following lines. This sets the user ID to zoiper and password to the password of your choice. Any number of users can use this ID at the same time. ; Login for zoiper [zoiper] username=Users type=friend context=zoiper host=dynamic auth=md5 secret=yourZoiperPassword di… Try something like this: ```auto exten => 500540,1,rpt(${EXTEN}|P|${CALLERID(name)}-P) ``` ---
**Author:** ![n4crg](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/n/71e660/32.png) [@n4crg](https://community.allstarlink.org/u/n4crg)\ **Post date:** [July 21, 2019, 12:18pm UTC](https://community.allstarlink.org/t/sip-cisco303-no-caller-id/15198/3 "2019-07-21T12:18:42Z")
Cisco 303 is a classic VOIP desk phone that uses SIP.conf, I added your suggestion to extensions with no luck. ![image](https://community.allstarlink.org/uploads/default/original/1X/81c0197e4043b617319752593c6a1a66d18a522a.png) ---
**Author:** ![WD6AWP](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wd6awp/32/5_2.png) [@WD6AWP](https://community.allstarlink.org/u/WD6AWP)\ **Post date:** [July 21, 2019, 2:11pm UTC](https://community.allstarlink.org/t/sip-cisco303-no-caller-id/15198/4 "2019-07-21T14:11:50Z")
Did you restart asterisk or do a `dialplan reload` after editing extensions.conf? Also you can do a `dialplan show sip-phones` after reload to see the modified context. Just FYI, my sip phone beeps every 10 seconds when adding the caller ID. I don’t know why. I also hear a connect message when connecting. ---
**Author:** ![n4crg](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/n/71e660/32.png) [@n4crg](https://community.allstarlink.org/u/n4crg)\ **Post date:** [July 21, 2019, 7:11pm UTC](https://community.allstarlink.org/t/sip-cisco303-no-caller-id/15198/5 "2019-07-21T19:11:09Z")
I added this to extensions.conf and reloaded the dial plan and rebooted. Works GREAT!! [sip-phones] ; Allow SIP calls to local nodes exten =\> 48671,1,rpt(${EXTEN}|P|${CALLERID(name)}-P) ![image](https://community.allstarlink.org/uploads/default/original/1X/80e2075ef896de7bda29b3b05cd244b57e1cbc32.png) ---
**Author:** ![wa6fsj](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/w/dbc845/32.png) [@wa6fsj](https://community.allstarlink.org/u/wa6fsj)\ **Post date:** [September 4, 2020, 2:16am UTC](https://community.allstarlink.org/t/sip-cisco303-no-caller-id/15198/6 "2020-09-04T02:16:36Z")
> [@WD6AWP](#): > > Just FYI, my sip phone beeps every 10 seconds when adding the caller ID. I don’t know why. I also hear a connect message when connecting. This comes a little late, but same thing happened to me with a Cisco SPA508G. The Cisco phone beep is an alert to a “text message” (not to be confused with SMS), apparently resulting from something being sent to it from the node every 10 seconds. I don’t know what the deal is with that, but a work around is to shut off the feature on the phone. In the phone web config: “User” tab \> “Supplementary Services” \> “Text Message:” change to off …End of beeping. If someone knows how to fix this on the node end, please jump in. I’d like to use that feature on the phone for other stuff. Larry