# Simple Voter Setup
**URL:** https://community.allstarlink.org/t/simple-voter-setup/19439
**Category:** Archive
**Created:** [June 28, 2022, 10:56pm UTC](https://community.allstarlink.org/t/simple-voter-setup/19439 "2022-06-28T22:56:55Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@n2mh](https://community.allstarlink.org/u/n2mh)
#### Post date: [June 28, 2022, 10:56pm UTC](https://community.allstarlink.org/t/simple-voter-setup/19439/1 "2022-06-28T22:56:56Z")
I see from a post by w3kkc ([ASL 2.0.0 Beta USBradio CTCSS?](https://community.allstarlink.org/t/asl-2-0-0-beta-usbradio-ctcss/18271)) that Simple Voter has been incorporated into ASL 2.0.0 Beta. I also see some notes in the AllStarLink wiki ([Simple voter - AllStarLink Wiki](https://wiki.allstarlink.org/wiki/Simple_voter)) about Simple Voter from the days when it was available in Xipar.
Has anyone actually set one up using the 2.0.0 voter? And, in the wiki, there is mention about a urd.conf file. Is there any template available for this file?
Finally, rummaging around the source code I thought I saw something about a chan\_urd module. Is this module necessary for Simple Voter? Could this be the need for a urd.conf file?
I have just brought up a remote base on 29.6 and the e-skip QSB is driving me nuts. My idea is to set up diversity reception using a vertical antenna and a horizontal antenna at the same site and use Simple Voter to switch between them (receive only). I did this years ago using a nor-gate based flip flop and a pair of 4066 cmos switches for the audio and it worked well. I’d like to update the approach and use Simple Voter if it is supported.
73, Mark, N2MH
---
### Author:  [@dwarnok](https://community.allstarlink.org/u/dwarnok)
#### Post date: [June 30, 2022, 12:10am UTC](https://community.allstarlink.org/t/simple-voter-setup/19439/2 "2022-06-30T00:10:39Z")
Does [Simple voter - AllStarLink Wiki](http://wiki.allstarlink.org/wiki/Simple_voter) meet your needs?