# Setup Asterisk PBX inbound calls with local phone	number?

**URL:** <https://community.allstarlink.org/t/setup-asterisk-pbx-inbound-calls-with-local-phone-number/10125>\
**Category:** AllStarLink\
**Created:** [May 12, 2013, 6:13pm UTC](https://community.allstarlink.org/t/setup-asterisk-pbx-inbound-calls-with-local-phone-number/10125 "2013-05-12T18:13:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Va3ark](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/v/71c47a/32.png) [@Va3ark](https://community.allstarlink.org/u/Va3ark)\
**Post date:** [May 12, 2013, 6:13pm UTC](https://community.allstarlink.org/t/setup-asterisk-pbx-inbound-calls-with-local-phone-number/10125/1 "2013-05-12T18:13:20Z")

</div>

Setup Asterisk PBX inbound calls with local phone number?  
Question to the group:

I would like to explore setting up the Asterisk PBX similar to the Allstar dial in service. I have setup a fly number account and now have a dialup access number for my city. I have been reading on [http://www.flynumber.com/asterisk-pbx-configuration](http://www.flynumber.com/asterisk-pbx-configuration) that I need to modify the sip.conf and iax.conf. I would like to use the PBX for inbound calls only, and have it pass calls to the repeater and also to just a telephone for those who wish to reach me without going to the repeater allstar node.

My question is, anyone else doing this? Is it possible?

Thanks,

Dan, va3ark

---

<div class="post-metadata">

**Author:** ![FlyNumber](https://community.allstarlink.org/user_avatar/community.allstarlink.org/flynumber/32/3135_2.png) [@FlyNumber](https://community.allstarlink.org/u/FlyNumber)\
**Post date:** [July 23, 2024, 9:44pm UTC](https://community.allstarlink.org/t/setup-asterisk-pbx-inbound-calls-with-local-phone-number/10125/2 "2024-07-23T21:44:50Z")

</div>

Hi All,

11 years late I know but better late then never amirite?

New to the world of radio repeaters but looks very interesting nonetheless.

If anyone comes across this topic I thought I’d share this post [AllStar Link SIP Trunk in FreePBX - #4 by Doug](https://community.allstarlink.org/t/allstar-link-sip-trunk-in-freepbx/11750/4) … it seems Dougs solution could be adapted here.

Also this link [Adding SIP phones to an Allstarlink node | Nettverk, distribusjon, radio](https://anders.fongen.no/adding-sip-phones-to-an-allstarlink-node/)
