# RTCM gps using garmin 18 reports date as 2001 **URL:** \ **Category:** AllStarLink\ **Created:** [June 14, 2021, 1:35am UTC](https://community.allstarlink.org/t/rtcm-gps-using-garmin-18-reports-date-as-2001/18690 "2021-06-14T01:35:08Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![WD6AWP](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wd6awp/32/5_2.png) [@WD6AWP](https://community.allstarlink.org/u/WD6AWP)\ **Post date:** [June 14, 2021, 4:59am UTC](https://community.allstarlink.org/t/rtcm-gps-using-garmin-18-reports-date-as-2001/18690/2 "2021-06-14T04:59:21Z")
Check out this topic for new firmware that may fix the date problem. > [@RTCM/VOTER Updated Firmware](https://community.allstarlink.org/t/rtcm-voter-updated-firmware/18451): > > I am not going to get in to the politics of the Github repo. I forked the RTCM/VOTER firmware part, prior to things going sideways, so I could do some development. You can find my current work at: [https://github.com/ve7fet/voter](https://github.com/ve7fet/voter) If you look through the Releases, you will see I have made a bunch of changes to the code. Up to you, if you want to experiment. I have run them all on through-hole (VOTER) board, as well as on RTCM’s. Lots of comments have been added to the code, after going over it … --- _[View the full topic](https://community.allstarlink.org/t/rtcm-gps-using-garmin-18-reports-date-as-2001/18690)._