Hello All I have a AllStar node using a raspberry pi 3b and was looking at using the GPIO pins on the RPi to send a tx and rx status to an rgb led. Any help would be great i have tried several ways but no success.

Hi Brett, Welcome aboard our new community site. [image] Bretteld74: looking at using the GPIO pins on the RPi to send a tx and rx status to an rgb led Take a look at the app_rpt management system . Have it call a script that turns your LEDs on and off.

For anyone looking at using Raspberry pi Gpio pins for Led status this what i did to get it to work. Go to and open using winSCP /etc/rc.local under /usr/local/etc/rc.allstar type in /etc/asterisk/local/write_gpio.sh (makes gpio pins go to output upon startup) then save then type nano /etc/ast…

Woohoo! :clap: :tada: :confetti_ball: Congratulations on using the app_rpt Event Management system. As far as I know, you are the first. That’s awesome!

I for many years have been using what seems like a complex event system, but it is really simple and works great and does exactly what I wanted it to do. It lets the person who timedout the repeater and others, know when a timed out repeater has reset from a local timeout and it also prevents weath…

AllStarLink Community Forum

Raspberry Pi3 GPIO tx/rx status led

AllStarLink

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled