# Problems connecting to multiple servers
**URL:** https://community.allstarlink.org/t/problems-connecting-to-multiple-servers/23586
**Category:** AllStarLink
**Tags:** new-users
**Created:** [August 9, 2025, 1:04pm UTC](https://community.allstarlink.org/t/problems-connecting-to-multiple-servers/23586 "2025-08-09T13:04:20Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@N9NJS](https://community.allstarlink.org/u/N9NJS)
#### Post date: [August 9, 2025, 1:04pm UTC](https://community.allstarlink.org/t/problems-connecting-to-multiple-servers/23586/1 "2025-08-09T13:04:21Z")
## Setup Information
_Use `sudo asl-show-version` to obtain this information from the console or SSH_
Asterisk Version: 22..x.y+asl3-3.n.m
ASL3 Version: 3.x.y
## Inquiry
_See [https://allstarlink.github.io/user-guide/troubleshooting/](https://allstarlink.github.io/user-guide/troubleshooting/) on how to ask a good question to obtain the quickest and best assistanceSee_ [Basic Troubleshooting Tips - AllStarLink Manual](https://allstarlink.github.io/user-guide/troubleshooting/) _on how to ask a good question to obtain the quickest and best assistance_
---
### Author:  [@Mike](https://community.allstarlink.org/u/Mike)
#### Post date: [August 9, 2025, 1:11pm UTC](https://community.allstarlink.org/t/problems-connecting-to-multiple-servers/23586/2 "2025-08-09T13:11:24Z")
Brent, is there a question in there ?
Perhaps you had issues with the post. Try again to explain issue.
---
### Author:  [@N9NJS](https://community.allstarlink.org/u/N9NJS)
#### Post date: [August 9, 2025, 8:42pm UTC](https://community.allstarlink.org/t/problems-connecting-to-multiple-servers/23586/3 "2025-08-09T20:42:59Z")
Having problems connected to multiple servers I use the password that I was issued from the portal as well as my node number. It takes sometimes several minutes to connect if it does connect at all. This is on a m1ke device shark RF. Other than m
y node number and my password that was generated what could possibly be wrong. Am I supposed to generate my own password or use the one that they gave me. Any help would be greatly appreciated
---
### Author:  [@Mike](https://community.allstarlink.org/u/Mike)
#### Post date: [August 10, 2025, 1:10am UTC](https://community.allstarlink.org/t/problems-connecting-to-multiple-servers/23586/4 "2025-08-10T01:10:53Z")
What are you issuing connection commands on and to what are you attempting to connect to ?
Trying to figure out the actual connection attempt.
---
### Author:  [@N9NJS](https://community.allstarlink.org/u/N9NJS)
#### Post date: [August 10, 2025, 5:41am UTC](https://community.allstarlink.org/t/problems-connecting-to-multiple-servers/23586/5 "2025-08-10T05:41:02Z")
Winn system, Cross Roads, East Coast seems to take a long time to connect to some of these other times it goes through. Sometimes it takes 5 minutes to connect. I am using the m1ke device from Shark RF
---
### Author:  [@Mike](https://community.allstarlink.org/u/Mike)
#### Post date: [August 10, 2025, 11:59am UTC](https://community.allstarlink.org/t/problems-connecting-to-multiple-servers/23586/6 "2025-08-10T11:59:14Z")
> [@N9NJS](#):
>
> Winn system, Cross Roads, East Coast
These are networks. I was looking for node numbers, no matter if they are part of a network.
Stating the network is just saying what they are as a group of nodes.
It matters to understand the connection issue..
So, you are failing to connect using m1ke ? Not asl.