# Problem connecting simpleusb to allstar

**URL:** <https://community.allstarlink.org/t/problem-connecting-simpleusb-to-allstar/21768>\
**Category:** Archive\
**Created:** [August 29, 2024, 7:42pm UTC](https://community.allstarlink.org/t/problem-connecting-simpleusb-to-allstar/21768 "2024-08-29T19:42:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ve6mld](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/v/94ad74/32.png) [@ve6mld](https://community.allstarlink.org/u/ve6mld)\
**Post date:** [August 29, 2024, 7:42pm UTC](https://community.allstarlink.org/t/problem-connecting-simpleusb-to-allstar/21768/1 "2024-08-29T19:42:28Z")

</div>

Good afternoon.

Im having problems with audio in and out on SimpleUsb ( RimLite).  
Im running the lastest AllStar Hamvoip on my raspberry Pi4 and connected to RC210 controller.  
RC210 settings:  
Timers tab : Active Hangtimeer for port 3 is )  
Port switches Port 3: Tx enabled, Rx enabled, RPT mode disabled, Access mode is Carrier  
Port jumpers:  
Port 3 De-emphasis is flat,Port 3 COS jumper 6 for COS LOW pins 1 & 2.  
I followed all the setting from Repeater builder sheet.

- ; ; Usbradio channel driver Configuration File ;

[general]

[usb27225]

hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=100.0 rxctcssfreqs=100.0 txctcssfreqs=100.0 ;rxctcssoverride=0 carrierfrom=dsp ctcssfrom=dsp rxdemod=flat txprelim=yes txlimonly=no txtoctype=notone txmixa=composite txmixb=0

invertptt=0 duplex=0 rxondelay=0 rxnoisefiltype=0 eeprom=1

#includeifexists custom/usbradio.conf

-

---

<div class="post-metadata">

**Author:** ![ve6mld](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/v/94ad74/32.png) [@ve6mld](https://community.allstarlink.org/u/ve6mld)\
**Post date:** [August 30, 2024, 9:17pm UTC](https://community.allstarlink.org/t/problem-connecting-simpleusb-to-allstar/21768/2 "2024-08-30T21:17:57Z")

</div>

thanks for the info.

so which usb do i use for the SimpleUSD.conf for Rimlite adapter?