# Pi star zero analogue input

**URL:** <https://community.allstarlink.org/t/pi-star-zero-analogue-input/20764>\
**Category:** Archive\
**Created:** [January 17, 2024, 11:53pm UTC](https://community.allstarlink.org/t/pi-star-zero-analogue-input/20764 "2024-01-17T23:53:45Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![M6OEF](https://community.allstarlink.org/user_avatar/community.allstarlink.org/m6oef/32/2553_2.png) [@M6OEF](https://community.allstarlink.org/u/M6OEF)\
**Post date:** [January 17, 2024, 11:53pm UTC](https://community.allstarlink.org/t/pi-star-zero-analogue-input/20764/1 "2024-01-17T23:53:45Z")

</div>

Hi, im currently running a pi star zero with an FT2DE on DN mode to communicate. Is there anyway of being able to use an analogue signal into the pi instead of a digi signal? Thanks

---

<div class="post-metadata">

**Author:** ![KK6RQ](https://community.allstarlink.org/user_avatar/community.allstarlink.org/kk6rq/32/3511_2.png) [@KK6RQ](https://community.allstarlink.org/u/KK6RQ)\
**Post date:** [January 18, 2024, 2:59am UTC](https://community.allstarlink.org/t/pi-star-zero-analogue-input/20764/2 "2024-01-18T02:59:10Z")

</div>

Presumably you mean a Pi Zero 2W, because an original Pi Zero doesn’t have the horsepower to run Allstar reliably (but DOES have enough for Pi-Star and the digital modes).

-Bob  
KK6RQ

---

<div class="post-metadata">

**Author:** ![Crigstar](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/c/f475e1/32.png) [@Crigstar](https://community.allstarlink.org/u/Crigstar)\
**Post date:** [January 19, 2024, 2:58pm UTC](https://community.allstarlink.org/t/pi-star-zero-analogue-input/20764/3 "2024-01-19T14:58:40Z")

</div>

No, Pi-Stars are digital only. I use a separate AllStarLink node to complement my Pi-Stars and have one VFO on digital and the other on analogue. You may be able to use the Pi-Star hardware and turn it into an ASL node but I have not looked into that.  
K2IP Tony

---

<div class="post-metadata">

**Author:** ![KK6RQ](https://community.allstarlink.org/user_avatar/community.allstarlink.org/kk6rq/32/3511_2.png) [@KK6RQ](https://community.allstarlink.org/u/KK6RQ)\
**Post date:** [January 25, 2024, 6:55am UTC](https://community.allstarlink.org/t/pi-star-zero-analogue-input/20764/4 "2024-01-25T06:55:50Z")

</div>

I think my reading glasses were fogged up at the time… conflation in the nation…

-Bob  
KK6RQ