# Permanent Connections via Terminal

**URL:** <https://community.allstarlink.org/t/permanent-connections-via-terminal/23529>\
**Category:** AllStarLink\
**Tags:** allmon3\
**Created:** [July 23, 2025, 8:45pm UTC](https://community.allstarlink.org/t/permanent-connections-via-terminal/23529 "2025-07-23T20:45:05Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Javier](https://community.allstarlink.org/user_avatar/community.allstarlink.org/javier/32/4219_2.png) [@Javier](https://community.allstarlink.org/u/Javier)\
**Post date:** [July 23, 2025, 8:45pm UTC](https://community.allstarlink.org/t/permanent-connections-via-terminal/23529/1 "2025-07-23T20:45:06Z")

</div>

Hello,

Is it possible to create a permanent node connection via the Terminal or even better via DTMF or must you use the Allmon3 console to do it.

Thanks,

--

Package Version  
============================== ==============================  
allmon3 1.5.1-1.deb12  
asl3 3.8-1.deb  
asl3-asterisk 2:22.4.1+asl3-3.5.4-1.deb12  
asl3-asterisk-config 2:22.4.1+asl3-3.5.4-1.deb12  
asl3-asterisk-modules 2:22.4.1+asl3-3.5.4-1.deb12  
asl3-menu 1.14-1.deb12  
asl3-pi-appliance 1.10.0-1.deb12  
asl3-update-nodelist 1.5.1-1.deb12  
cockpit 287.1-0+deb12u3  
cockpit-bridge 287.1-0+deb12u3  
cockpit-networkmanager 287.1-0+deb12u3  
cockpit-packagekit 287.1-0+deb12u3  
cockpit-pcp 287.1-0+deb12u3  
cockpit-sosreport 287.1-0+deb12u3  
cockpit-storaged 287.1-0+deb12u3  
cockpit-system 287.1-0+deb12u3  
cockpit-wifimanager 1.1.1-1.deb12  
cockpit-ws 287.1-0+deb12u3  
dahdi 1:3.1.0-2  
dahdi-dkms 1:3.4.0-6+asl  
dahdi-linux 1:3.4.0-6+asl

---

<div class="post-metadata">

**Author:** ![Javier](https://community.allstarlink.org/user_avatar/community.allstarlink.org/javier/32/4219_2.png) [@Javier](https://community.allstarlink.org/u/Javier)\
**Post date:** [July 23, 2025, 9:10pm UTC](https://community.allstarlink.org/t/permanent-connections-via-terminal/23529/2 "2025-07-23T21:10:57Z")

</div>

Ignore me, I found it, sorry...

---

<div class="post-metadata">

**Author:** ![Mike](https://community.allstarlink.org/user_avatar/community.allstarlink.org/mike/32/1569_2.png) [@Mike](https://community.allstarlink.org/u/Mike)\
**Post date:** [July 23, 2025, 11:49pm UTC](https://community.allstarlink.org/t/permanent-connections-via-terminal/23529/3 "2025-07-23T23:49:06Z")

</div>

Just for the record in the case folks stumble on this later,

There is nothing allmon or any manager can do that you can not do from the command line. For they are issuing commands in the same way.

---

<div class="post-metadata">

**Author:** ![system](https://community.allstarlink.org/uploads/default/original/2X/4/42700284e201b031bd667c3f63bbae05a74b3104.png) [@system](https://community.allstarlink.org/u/system)\
**Post date:** [July 26, 2025, 11:49pm UTC](https://community.allstarlink.org/t/permanent-connections-via-terminal/23529/4 "2025-07-26T23:49:58Z")

</div>

This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.