# Notch filter to remove CWID from repeaters

**URL:** <https://community.allstarlink.org/t/notch-filter-to-remove-cwid-from-repeaters/25201>\
**Category:** AllStarLink\
**Created:** [November 16, 2026, 12:29pm UTC](https://community.allstarlink.org/t/notch-filter-to-remove-cwid-from-repeaters/25201 "2026-11-16T12:29:46Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![KK6RQ](https://community.allstarlink.org/user_avatar/community.allstarlink.org/kk6rq/32/3511_2.png) [@KK6RQ](https://community.allstarlink.org/u/KK6RQ)\
**Post date:** [November 16, 2026, 7:51pm UTC](https://community.allstarlink.org/t/notch-filter-to-remove-cwid-from-repeaters/25201/6 "2026-11-16T19:51:22Z")

</div>

I was just going to say that seems like a bit of a kludge as to the way it's set up. If you're just picking the audio off the air, whatever's in that audio is going to go over the network. Best practice would be to attach an Allstar node to the repeater and link to it that way, with ASL as the repeater controller. That way, you'd be able to tweak the CWID however you want. You also wouldn't have to worry about repeater hang (or telemetry/bloops & bleeps) going over the network.

---

_[View the full topic](https://community.allstarlink.org/t/notch-filter-to-remove-cwid-from-repeaters/25201)._
