# Non RF System for Monitoring

**URL:** <https://community.allstarlink.org/t/non-rf-system-for-monitoring/16616>\
**Category:** AllStarLink\
**Created:** [March 16, 2020, 8:07pm UTC](https://community.allstarlink.org/t/non-rf-system-for-monitoring/16616 "2020-03-16T20:07:33Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Ben\_Cranston](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/b/94ad74/32.png) [@Ben\_Cranston](https://community.allstarlink.org/u/Ben_Cranston)\
**Post date:** [March 17, 2020, 2:27pm UTC](https://community.allstarlink.org/t/non-rf-system-for-monitoring/16616/2 "2020-03-17T14:27:48Z")

</div>

Hi Ash. Nice to hear you have your RPi device loaded and registered. Please look at: [Zoiper Setup for AllStar](https://community.allstarlink.org/t/zoiper-setup-for-allstar/14893) for instructions on how to setup Zoiper on a non-RF node. I personally used that method for a while until I got my RF connection running. You’ll want to test with various gain settings in Zoiper. For me the defaults were over driving the audio and I had to back it down a bit. Enjoy!

---

_[View the full topic](https://community.allstarlink.org/t/non-rf-system-for-monitoring/16616)._