# New hardware interface to replace URI-X and voter board

**URL:** <https://community.allstarlink.org/t/new-hardware-interface-to-replace-uri-x-and-voter-board/17521>\
**Category:** AllStarLink\
**Created:** [September 4, 2020, 4:30pm UTC](https://community.allstarlink.org/t/new-hardware-interface-to-replace-uri-x-and-voter-board/17521 "2020-09-04T16:30:12Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Pierre\_Martel](https://community.allstarlink.org/user_avatar/community.allstarlink.org/pierre_martel/32/575_2.png) [@Pierre\_Martel](https://community.allstarlink.org/u/Pierre_Martel)\
**Post date:** [September 7, 2020, 2:16am UTC](https://community.allstarlink.org/t/new-hardware-interface-to-replace-uri-x-and-voter-board/17521/7 "2020-09-07T02:16:43Z")

</div>

I’m no coder, I know just enough to create havoc 😉

But I just downloaded the build environment for the stm32f7

If I can import the project in there and then “try” to fix the error in compilation, it could at least be a kind of step.  
If that can be done I am ordering the cube development board and I will try to at least do the alpha testing.

After all the stm32f7 and the dsPIC are from micho-chip… I could be a dreamer. But I will try.

> **···**
>
> Le dim. 6 sept. 2020 à 18:52, Tim Sawyer via AllStarLink Discussion Groups \<[noreply@community.allstarlink.org](mailto:noreply@community.allstarlink.org)\> a écrit :
> 
> > > ![](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wd6awp/45/5_2.png "wd6awp") | [wd6awp](https://community.allstarlink.org/u/wd6awp) ASL Admin  
> > > September 6 |
> > > 
> > > - | - |
> > 
> > The RTCM code is here:
> > 
> > [GitHub](https://github.com/AllStarLink/voter)
> > 
> > ### [AllStarLink/voter](https://github.com/AllStarLink/voter)
> > 
> > Contribute to AllStarLink/voter development by creating an account on GitHub.
> > 
> > and there is at least one person around here that is familiar with it.
> > 
> > * * *
> > 
> > [Visit Topic](https://community.allstarlink.org/t/new-hardware-interface-to-replace-uri-x-and-voter-board/17521/6) or reply to this email to respond.
> > 
> > * * *
> > 
> > #### In Reply To
> > 
> > > ![](https://community.allstarlink.org/user_avatar/community.allstarlink.org/pierre_martel/45/575_2.png "Pierre\_Martel") | [Pierre\_Martel](https://community.allstarlink.org/u/pierre_martel)  
> > > September 6 |
> > > 
> > > - | - |
> > 
> > If the firmware of the rtcm/voter board would be kind of compatible or transferable to the stm32 I would try to make it. As we have the source… those thing are so damn useful 😉 ··· [(click for more details)](https://community.allstarlink.org/t/new-hardware-interface-to-replace-uri-x-and-voter-board/17521/5)
> > 
> > * * *
> > 
> > [Visit Topic](https://community.allstarlink.org/t/new-hardware-interface-to-replace-uri-x-and-voter-board/17521/6) or reply to this email to respond.
> > 
> > You are receiving this because you enabled mailing list mode.
> > 
> > To unsubscribe from these emails, [click here](https://community.allstarlink.org/email/unsubscribe/c145df49b14790ff82d063e4532a1fcf4e6a283ff1cad254acb00763def47ecb).

---

_[View the full topic](https://community.allstarlink.org/t/new-hardware-interface-to-replace-uri-x-and-voter-board/17521)._