# Looking for help with connect to.Kenwood TKR851 repeater

**URL:** <https://community.allstarlink.org/t/looking-for-help-with-connect-to-kenwood-tkr851-repeater/19984>\
**Category:** Archive\
**Created:** [March 11, 2023, 7:41am UTC](https://community.allstarlink.org/t/looking-for-help-with-connect-to-kenwood-tkr851-repeater/19984 "2023-03-11T07:41:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![N7COX](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n7cox/32/2445_2.png) [@N7COX](https://community.allstarlink.org/u/N7COX)\
**Post date:** [March 11, 2023, 7:41am UTC](https://community.allstarlink.org/t/looking-for-help-with-connect-to-kenwood-tkr851-repeater/19984/1 "2023-03-11T07:41:10Z")

</div>

I jave a Kenwood TKR851 UHF repeater and a Allstar RTCM anf im looking for any information interfacing these two devices for repeater operation in respect to a wiring diagram between the Allstar Node and the repeater and any special changes or programming info…any help would be appreciated.  
Im new to the DNR Ham enviroment  
Thanks

---

<div class="post-metadata">

**Author:** ![AH6LE](https://community.allstarlink.org/user_avatar/community.allstarlink.org/ah6le/32/1817_2.png) [@AH6LE](https://community.allstarlink.org/u/AH6LE)\
**Post date:** [March 11, 2023, 6:40pm UTC](https://community.allstarlink.org/t/looking-for-help-with-connect-to-kenwood-tkr851-repeater/19984/2 "2023-03-11T18:40:40Z")

</div>

While not specifically written for interfacing an RTCM, this doc does show the wiring and programming needed (the TKR-750/751 are identical in this way)

[https://www.arcomcontrollers.com/documents/rc210/rc210\_tkr.pdf](https://www.arcomcontrollers.com/documents/rc210/rc210_tkr.pdf)