# LIve status of inout/output of a simpleusb node using a URi-X

**URL:** <https://community.allstarlink.org/t/live-status-of-inout-output-of-a-simpleusb-node-using-a-uri-x/16953>\
**Category:** AllStarLink\
**Created:** [May 13, 2020, 5:01pm UTC](https://community.allstarlink.org/t/live-status-of-inout-output-of-a-simpleusb-node-using-a-uri-x/16953 "2020-05-13T17:01:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pierre\_Martel](https://community.allstarlink.org/user_avatar/community.allstarlink.org/pierre_martel/32/575_2.png) [@Pierre\_Martel](https://community.allstarlink.org/u/Pierre_Martel)\
**Post date:** [May 13, 2020, 5:01pm UTC](https://community.allstarlink.org/t/live-status-of-inout-output-of-a-simpleusb-node-using-a-uri-x/16953/1 "2020-05-13T17:01:38Z")

</div>

Is there a way to view the status of the URI-X pins while testing a node

A nice application that poll the URI-X with out even running asterisk would be so nice to have when you are programing a repeater and want to confirm that the cor or ctss line are pulled high or low.

Linux or windows I dont care. (but windows would be the best as usely you program the radio on windows.

we would just have to connect the URI-X (or moded fob) to the windows machine and have a visual statur of the pins… I am no programmer I code on c on my arduino’s and some python on my raspberry pi’s but not enough to be able to do such a thing…

Was not there a way to see the status of a node by the asterisk cli?

---

<div class="post-metadata">

**Author:** ![WD6AWP](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wd6awp/32/5_2.png) [@WD6AWP](https://community.allstarlink.org/u/WD6AWP)\
**Post date:** [May 14, 2020, 3:32am UTC](https://community.allstarlink.org/t/live-status-of-inout-output-of-a-simpleusb-node-using-a-uri-x/16953/2 "2020-05-14T03:32:47Z")

</div>

The simpleusb-tune-menu of HamVoIP does that. I’m not recommending HamVoIP because of OpenSource issues… just saying.
