# Laptop WiFi issues, no driver installed

**URL:** <https://community.allstarlink.org/t/laptop-wifi-issues-no-driver-installed/19222>\
**Category:** Archive\
**Tags:** new-users\
**Created:** [February 28, 2022, 1:38am UTC](https://community.allstarlink.org/t/laptop-wifi-issues-no-driver-installed/19222 "2022-02-28T01:38:47Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![K7iou1](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/a587f6/32.png) [@K7iou1](https://community.allstarlink.org/u/K7iou1)\
**Post date:** [February 28, 2022, 1:38am UTC](https://community.allstarlink.org/t/laptop-wifi-issues-no-driver-installed/19222/1 "2022-02-28T01:38:47Z")

</div>

Old Dell laptop that had Win10 and WiFi worked. Bios WiFi enabled. Installed this version [Index of /files/ASL\_Images/Intel-AMD/Stretch](http://dvswitch.org/files/ASL_Images/Intel-AMD/Stretch/)  
Ethernet works. Added supplicant and rfkill. To be honest I no education in Linux and can’t seem to find a good cheat sheet for dummies. All I can tell is there’s no driver for Wireless enp9s0. I can’t seem to run rfkill list because I don’t have the knowledge where or what directory to run it. I’ve tried sudo wpa\_supplicant -B -c /etc/wpa\_supplicant.conf -i enp9s0 and I’m denied access , no permission. For the life of me I don’t understand why WiFi wasn’t written in the programming? Thanks  
[No Wifi connection to laptop on home LAN](https://community.allstarlink.org/t/no-wifi-connection-to-laptop-on-home-lan/19150)

---

<div class="post-metadata">

**Author:** ![Mike](https://community.allstarlink.org/user_avatar/community.allstarlink.org/mike/32/1569_2.png) [@Mike](https://community.allstarlink.org/u/Mike)\
**Post date:** [February 28, 2022, 2:26am UTC](https://community.allstarlink.org/t/laptop-wifi-issues-no-driver-installed/19222/2 "2022-02-28T02:26:48Z")

</div>

Picking up on the stated ‘no driver’  
Much of the network drivers are not on the default repo’s  
Especially laptop stuff.

You should try this for NONFREE (its free)

[https://www.xmodulo.com/install-nonfree-packages-debian.html](https://www.xmodulo.com/install-nonfree-packages-debian.html)  
or  
Find the manufacture and look for linux drivers.

You are probably going to need to id the interface and search if this does not work.

---

<div class="post-metadata">

**Author:** ![K7iou1](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/a587f6/32.png) [@K7iou1](https://community.allstarlink.org/u/K7iou1)\
**Post date:** [March 1, 2022, 3:18am UTC](https://community.allstarlink.org/t/laptop-wifi-issues-no-driver-installed/19222/3 "2022-03-01T03:18:46Z")

</div>

Got the driver installed. Now rfkill hard locks adapter when I enter this:  
sudo wpa\_supplicant -B -c /etc/wpa\_supplicant.conf -i wlan0  
🤔

---

<div class="post-metadata">

**Author:** ![Mike](https://community.allstarlink.org/user_avatar/community.allstarlink.org/mike/32/1569_2.png) [@Mike](https://community.allstarlink.org/u/Mike)\
**Post date:** [March 1, 2022, 2:00pm UTC](https://community.allstarlink.org/t/laptop-wifi-issues-no-driver-installed/19222/4 "2022-03-01T14:00:29Z")

</div>

No sure what it is you are trying to do ?

If you need to edit the config file, it’s located here…

/etc/wpa\_supplicant/wpa\_supplicant.conf

perhaps make a backup before editing ?

edit  
sudo nano /etc/wpa\_supplicant/wpa\_supplicant.conf

it should look like this…

country=US  
ctrl\_interface=DIR=/var/run/wpa\_supplicant GROUP=netdev  
update\_config=1  
ap\_scan=1  
fast\_reauth=1

network={  
ssid=“mywifi”  
psk=“mypassword”  
id\_str=“1”  
priority=60  
}

Note: erase unused connections in the file or comment them out. This stops delay from attempts to make connections that are not there. You should read a bit about how this works.

---

<div class="post-metadata">

**Author:** ![K7iou1](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/a587f6/32.png) [@K7iou1](https://community.allstarlink.org/u/K7iou1)\
**Post date:** [March 1, 2022, 6:15pm UTC](https://community.allstarlink.org/t/laptop-wifi-issues-no-driver-installed/19222/5 "2022-03-01T18:15:46Z")

</div>

Because it’s a laptop the wireless WiFi wouldn’t work. I downloaded the Broadcom driver and installed it. Between two postings from two different websites I got it connected wireless on my WiFi.  
I’m a newbie and never worked with Debian before. Now I need to figure out how to edit and save so it will connect automatically on boot. I’m unsure how to save the settings. Any help would be appreciated. I don’t know how to locate, backup and edit the files in the attached picture.

> **[Using WPA\_Supplicant to Connect to WPA2 Wi-fi from Terminal on Ubuntu 16.04...](https://www.linuxbabe.com/command-line/ubuntu-server-16-04-wifi-wpa-supplicant)**
>
> In this tutorial, we are going to learn how to connect to Wi-fi network from the command line on Ubuntu 16.04 server and desktop using wpa\_supplicant.

 ![image](https://community.allstarlink.org/uploads/default/original/2X/c/cbdb34f63b922acc4a0f05dc2f2e720846af0089.jpeg)

---

<div class="post-metadata">

**Author:** ![Mike](https://community.allstarlink.org/user_avatar/community.allstarlink.org/mike/32/1569_2.png) [@Mike](https://community.allstarlink.org/u/Mike)\
**Post date:** [March 1, 2022, 8:07pm UTC](https://community.allstarlink.org/t/laptop-wifi-issues-no-driver-installed/19222/6 "2022-03-01T20:07:40Z")

</div>

While I have not used ubuntu since ver 5, I don’t think they are the same for your debian install.

The rest of config may not have occurred because there was no wifi network as there was no network driver for wireless hardware. But somehow I doubt it.

While I know I did this once in a laptop, I do not think I w  
had to do anything but edit the wpa suplicant file. My poor memory is no help I’m sure.

There is a network gui and here is what debian says on this matter…  
.[https://wiki.debian.org/WiFi/HowToUse](https://wiki.debian.org/WiFi/HowToUse)

Not sure where you should go from there.

---

<div class="post-metadata">

**Author:** ![K7iou1](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/a587f6/32.png) [@K7iou1](https://community.allstarlink.org/u/K7iou1)\
**Post date:** [March 3, 2022, 1:09am UTC](https://community.allstarlink.org/t/laptop-wifi-issues-no-driver-installed/19222/7 "2022-03-03T01:09:56Z")

</div>

Fixed used instructions here and the nano text editor.

> **[Using WPA\_Supplicant to Connect to WPA2 Wi-fi from Terminal on Ubuntu 16.04...](https://www.linuxbabe.com/command-line/ubuntu-server-16-04-wifi-wpa-supplicant)**
>
> In this tutorial, we are going to learn how to connect to Wi-fi network from the command line on Ubuntu 16.04 server and desktop using wpa\_supplicant.

> **[How to Use Nano, the Linux Command Line Text Editor](https://linuxize.com/post/how-to-use-nano-text-editor/)**
>
> In this guide, explain the basic usage of the nano editor, including how to create and open a file, edit a file, save a file, search and replace text, cut and paste text, and more.
